All Polyurethane Caster Wheels

These solid all polyurethane caster wheels are non marking and non conductive. The absence of a metal center eliminates bond failure as a cause for wheel replacement. These caster wheels are especially suited for use with stainless steel casters in wet and corrosive applications. They are designed for use in Pharmaceutical Laboratories, Hospitals, and Food Processing Plants - wherever a clean sanitary design is desired. These wheels are not recommended for applications involving shock, overloading, abuse, obstructions, poor floors, or for storage (standing) loads. Hardness is 60 - 65 Durometer Shore D. Temperature range is -20° to 180° F. Standard wheel color is Blue.

These wheels are designed for use in a wet environment and they eliminate the possibility of tire separation.

R = Roller Bearing, D = Delrin Bearings, P = Plain Bore, PS = Precision Sealed Ball Bearings

IS THIS THE RIGHT WHEEL FOR YOUR APPLICATION?? CLICK TO COMPARE WITH OTHER WHEELS.

Click Here to see ALL available WHEEL ONLY sizes and to ORDER.
All Polyurethane 5" x 1 1/4" 60 D Durometer with Delrin Bearnings	All Polyurethane 6" x 2" 60 D Durometer with Delrin Bearnings	All Polyurethane 5" x 2" 60 D Durometer with Roller Bearning	All Polyurethane 4" x 2" V Groove 60 D Durometer with Ball Bearings
Photos are only a sample of available products. To see all available products & sizes, Scroll Down or Click Here.

This wheel can be purchased as a complete caster in the following:
	Model 3 Plate Mount Casters Capacity up to 300 Lbs.	Model 9 Plate Mount Casters Capacity up to 800 Lbs.	Model G15 Small Plate Mount Casters Capacity up to 800 Lbs.
	Stainless Model 3 Plate Mount Casters Capacity up to 300 Lbs.	Stainless Model 3A Total Lock Plate Mount Casters Capacity up to 250 Lbs.	Model 15 Large Plate Mount Casters Capacity up to 800 Lbs.
	Model 3 Stem Mount Casters Capacity up to 300 Lbs.	Stainless Model 3 Stem Mount Casters Capacity up to 300 Lbs.	Model 9A Total Locking Plate Mount Casters Capacity up to 800 Lbs.

How do I place an order ?

Return to My Shopping Cart

WHEELS ONLY
Click on the Wheel ONLY Part Numbers for Pricing and to ORDER.
Wheel Diam.	Tread Width	Hub Length	Capacity Lbs.		Durometer	Bearing I.D. / Type	I.D. with Spanner.	Approx. Wt.
				Wheel ONLY Part Number
3"	1 1/4"	1 9/16"	200	AP3x1-1/4-60D-P	60D	1/2" P	3/8"	1/2
4"	1 1/4"	1 9/16"	250	AP4x1-1/4-60D-P	60D	1/2" P	3/8"
	2"	2 7/16"	600	AP4x2-60D-PS	60D	1/2" PS	1/2"	1 1/2
				AP4x2-60D-R		3/4" R
				AP4x2-60D-D		3/4" D
	2 V Groove	2 1/2"	400	APV4x2B-1/2THS	60D	1/2" PS	1/2"	1 1/2
5"	1 1/4"	1 9/16"	300	AP5x1-1/4-60D-P	60D	1/2" P	3/8"	1
	2"	2 7/16"	700	AP5x2-60D-PS	60D	1/2" PS	N/A	2
				AP5x2-60D-R		3/4" R	1/2"
				AP5x2-60D-D		3/4" D
6"	2"	2 7/16"	800	AP6x2-60D-PS	60D	1/2" PS	N/A	2 1/2
				AP6x2-60D-R		3/4" R	1/2"
				AP6x2-60D-D		3/4" D
8"	2"	2 7/16"	900	AP8x2-60D-PS	60D	1/2" PS	N/A	4
				AP8x2-60D-R		3/4" R	1/2"
				AP8x2-60D-D		3/4" D
Click on the Part Number Below to Order Stainless Spanner Bushings.
To fit a 1/2" Axle				SS-SB-1/2x3/4x2-7/16

These all polyurethane caster wheels can be made in other sizes, shapes and durometers. Please contact us with the details of your application.

- Caster wheels with 3/4" I.D. bearings are furnished with a 2 7/16" long spanner bushing to fit a 1/2" Axle. If you need a stainless spanner bushing, it may be ordered above.

You should never select on the basis of load capacity alone. Capacity ratings do not take into account the effort required to manually move a load. Capacity ratings are based on manual operation under ideal conditions. If these wheels are going to be moved by mechanically powered equipment, consult us for a reduced capacity rating based on your application.

Photos & graphics are for informational purposes only. Actual product may vary slightly from those shown.
Wheel colors may vary unless specified. If wheel color is important, please contact us for current inventory.