Industrial Caster - Caster Model 100 - Plate Mount

Capacity up to 10,000 pounds per caster.
Model 100 has a large top plate and thick legs, which allow for heavy loads and more arduous service. Model 100 has a precision machined swivel bearing, which provides superior performance on both manually moved and mechanically powered equipment. Benefits include easier swiveling, reduced swivel vibration, and longer trouble free performance.

Load ratings are based on manually moved loads at a speed up to 3 mph under ideal operating conditions. Your application will almost never involve ideal operating conditions, which is a good reason to rely on our experienced and knowledgeable staff for a recommendation. Consult us for capacity rating based on your application if these casters are to be used with mechanically powered equipment.

Features:

Swivel Construction - precision machined combination load and thrust bearing with heat treated raceway. No center pin.
Legs - 3/8" thick, welded inside and out.
Axle - 1'' diameter solid bolt with lock nut on 3" wide wheels.
Axle - 1 1/4'' diameter solid bolt with lock nut on 4" wide wheels.
Wheel Bearing - 1" tapered roller bearings on 3" wide wheels.
Wheel Bearing - 1 1/4" tapered roller bearings on 4" wide wheels.
Grease Fittings - for swivel and wheel bearings.
V Groove Width - 1 3/8" Standard.
Finish - Brackets are zinc plated. Ductile steel wheels are painted.

Click Here to see ALL available sizes, wheels and to ORDER.
Ductile Steel Swivel Caster	Ductile Steel Rigid Caster	Ductile Steel V Groove Swivel Caster	Ductile Steel V Groove Rigid Caster
Ductile Steel Rigid Caster	Ductile Steel Swivel Caster	Heavy Duty Polyurethane on Iron Swivel Caster	Heavy Duty Polyurethane on Iron Rigid Caster
Photos are only a sample of available products. To see all available products & sizes, Scroll Down or Click Here.

Top Plate Size
Top Plate Size	Bolt Hole Spacing	Bolt Size
6 1/4" x 7 1/2"	4 1/2" x 6" Slotted to 4 1/8" x 6 1/8"	1/2"

How do I place an order ?

Return to My Shopping Cart

Click on the Part Numbers for Pricing, Options and to ORDER.
Caster Wheel Diam.	Tread Width	Click here to compare wheel materials.	Maximum Capacity Each lbs.			Approx Swivel Weight lbs.	Approx Swivel Radius	Overall Height
		Wheel Tread Material Click to see Wheel		Swivel Caster	Rigid Caster
6"	3"	Ductile Steel - Flat	10,000	100DS6x3T-S	100DS6x3T-R	35	4 3/4"	8 1/2"
		Ductile Steel - V Groove	10,000	100VS6x3T-S	100VS6x3T-R	31
8"	4"	Ductile Steel - Flat	10,000	100DS8x4T-S	100DS8x4T-R	46	6 3/16"	10 1/2"
		Polyurethane on Iron - Heavy Duty	4,000	100PYH8x4T-S	100PYH8x4T-R	48
10"	4"	Ductile Steel - Flat	10,000	100DS10x4T-S	100DS10x4T-R	71	7 11/16"	12 1/2"
		Polyurethane on Iron - Heavy Duty	5,000	100PYH10x4T-S	100PYH10x4T-R	59
12"	4"	Polyurethane on Iron - Heavy Duty	5,500	100PYH12x4T-S	100PYH12x4T-R	72	9 5/8"	15 1/2"

Deduct 8 lb. for weight of rigid caster.

You should never select on the basis of load capacity alone. Capacity ratings do not take into account the effort required to manually move a load. Capacity ratings are based on manual operation under ideal conditions. If these casters are going to be moved by mechanically powered equipment, consult us for a reduced capacity rating based on your application. If a human being has to move the weight, select the largest practical wheel diameter.

If a caster failure occurs it is almost always because of misuse or abuse. It has been very rare that a product failed because of faulty material or poor workmanship. The following are examples of things that we do NOT want you to do:

1. Dragging the wheel sideways.
2. Shock or Impact caused by dropping the load instead of setting it down on the castered equipment.
3. Improper Installation such as:
	A. Rigid casters not installed parallel to one another.
	B. Swivel casters not installed parallel to the floor.
	C. Using less than 4 bolts to attach the mounting plate.
	D. Distortion of the swivel bearing when attaching the mounting plate due to welding improperly.
4. Exceeding the rated capacity of the wheel or caster.
5. Exceeding a rolling speed of 3 MPH.
6. The build up of heat caused by continuous operation causing tire separation.

Photos & graphics are for informational purposes only. Actual product may vary slightly from those shown.
Wheel colors may vary unless specified. If wheel color is important, please contact us for current inventory.