Industrial Caster Model 14 - Plate Mount

Capacity up to 1,400 pounds per caster.
Model 14 is a cold forged caster with a larger swivel bearing and center pin than Model 9. It can be used for up to 1400 lbs per caster on manually moved equipment. If this caster is to be used with mechanically powered equipment we suggest not exceeding a weight of 800 lbs per caster. As a general rule you get a better return on your investment if you step up to Caster Model G15 or Caster Model 15 with 2" wide wheels.

Features:

Swivel Construction - cold forged top plate and yoke base from 1/4" steel.
Swivel has double ball bearing with hardened raceways.
Center Pin 3/4" diameter rivet or bolt and nut.
Legs - 1/4" thick, welded outside only.
Axle - 1/2'' diameter hollow bolt with lock nut.
Wheel Bearing -3/4" I.D. hardened straight roller bearings.
Grease Fittings - for swivel and wheel bearings.
Finish - external metal parts are zinc plated.

Optional Features:

Wheel Brake
- WB - Pedal on side of wheel.
Welded Swivel Lock
- SL4 - Locks Swivel, NOT wheel.

Click Here to see ALL available sizes, wheels and to ORDER.
Phenolic Swivel Caster WB wheel brake	Polyurethane on Iron Swivel Caster	Ductile Steel Rigid Caster	Phenolic Swivel Caster
Photos are only a sample of available products. To see all available products & sizes, Scroll Down or Click Here.

Top Plate Size
Top Plate Size	Bolt Hole Spacing	Bolt Size
4 1/2" x 6 1/4"	2 7/16" x 4 15/16" Slotted to 3 3/8" x 5 1/4"	1/2"

How do I place an order ?

Return to My Shopping Cart

Click on the Part Numbers for Pricing, Options and to ORDER.
Caster Wheel Diam.	Tread Width	Click here to compare wheel materials.	Std Brg Type	Maximum Capacity Each lbs.			Approx Swivel Weight	Approx Swivel Radius	Overall Height
Caster Wheel Diam.	Tread Width	Wheel Tread Material Click to see Wheel	Std Brg Type	Maximum Capacity Each lbs.	Swivel Caster	Rigid Caster	Approx Swivel Weight	Approx Swivel Radius	Overall Height
4"	2"	Polyurethane on Iron	R	700	14PY4x2-S	14PY4x2-R	8	3 5/16"	5 5/8"
		Phenolic	R	800	14TM4x2-S	14TM4x2-R	7
		Ductile Steel	R	1200	14DS4x2-S	14DS4x2-R	12
		V-Groove Ductile Steel	R	1200	14VS4x2-S	14VS4x2-R	12
6"	2	Polyurethane on Iron	R	1000	14PY6x2-S	14PY6x2-R	11	4 3/4"	7 1/2"
		Phenolic	R	1200	14TM6x2-S	14TM6x2-R	8 1/2
		Ductile Steel	R	1400	14DS6x2-S	14DS6x2-R	12 1/4
8"	2"	Polyurethane on Iron	R	1200	14PY8x2-S	14PY8x2-R	14	6 1/4"	9 1/2"
		Phenolic	R	1400	14TM8x2-S	14TM8x2-R	10
		Ductile Steel	R	1400	14DS8x2-S	14DS8x2-R	16

Deduct 2 lb. for weight of rigid caster.

You should never select on the basis of load capacity alone. Capacity ratings do not take into account the effort required to manually move a load. Capacity ratings are based on manual operation under ideal conditions. If these casters are going to be moved by mechanically powered equipment, consult us for a reduced capacity rating based on your application. If a human being has to move the weight, select the largest practical wheel diameter.

If a caster failure occurs it is almost always because of misuse or abuse. It has been very rare that a product failed because of faulty material or poor workmanship. The following are examples of things that we do NOT want you to do:

1. Dragging the wheel sideways.
2. Shock or Impact caused by dropping the load instead of setting it down on the castered equipment.
3. Improper Installation such as:
	A. Rigid casters not installed parallel to one another.
	B. Swivel casters not installed parallel to the floor.
	C. Using less than 4 bolts to attach the mounting plate.
	D. Distortion of the swivel bearing when attaching the mounting plate due to welding improperly.
4. Exceeding the rated capacity of the wheel or caster.
5. Exceeding a rolling speed of 3 MPH.
6. The build up of heat caused by continuous operation causing tire separation.

Photos & graphics are for informational purposes only. Actual product may vary slightly from those shown.
Wheel colors may vary unless specified. If wheel color is important, please contact us for current inventory.