Total Locking Casters - Caster Model 3A - Plate Mount |
Typical
Applications
|
Workbenches -
Shop Equipment - Kitchen Islands - Movie & Soundstage Equipment - Hospital
/ Medical Equipment Computer Equipment Stands and Mobile Workstations -
Electronics & Diagnostic Equipment and Carts Any Application requiring
the item to be held firmly in place. |
|
|
Capacity up to 300 pounds per caster.
These institutional casters are ideal for any light duty application
where the caster must be totally immobile when the caster brake is applied.
Caster Model 3A has a unique brake which locks both the wheel and the swivel
bearing at the same time. This "Total-Lock" brake insures that the swivel
caster will not turn when the wheel is locked. This combination wheel brake and
swivel lock is essential for safety in some applications - such as on
worktables, tablesaws, and medical equipment. The Total-Lock brake is
desireable whenever a brake is needed because it makes a swivel caster totally
immobile. The wheels featured with Caster Model 3A are non-marking Gray Soft
Rubber and Gray Polyurethane. Both wheels have a sealed Precision Ball Bearing
and Thread Guards. These caster wheels provide floor and cargo protection,
quiet operation, and are very easy rolling. Try a set! You will be amazed at
their performance.
|
Features:
- Swivel Construction - Stamped steel. Swivel has double
ball bearing.
- Gray Non-marking Soft Rubber, Gray Polyurethane, Black/Gray
Polyurethane, Blue/Gray, Red/Gray and Orange/Gray Polyurethane Wheels have
precision sealed ball bearings ( PS )
shielded by full thread guards. Polyurethane on Aluminun
Wheels have Ball Bearings ( B ) and do not have a thread guard.
Polyolefin wheels do not have ball bearings in the wheel ( P ).
|
Total-Lock Brake:
- Combination Wheel Brake and Swivel Lock - This brake
simultaneously locks the wheel and the swivel. One step on the activating pedal
instantly locks the entire caster holding the equipment firmly in place. One
step on the release pedal frees the swivel and wheel.
Click here for a Stem Mount Version |
 |
 |
 |
Total Lock Brake in the Un-Locked
Position |
Total Lock Brake in the Locked Position |
|
 3" Gray Polyurethane on a
workbench.
|
 3" Gray Polyurethane on a rolling
cabinet.
|
|
| Top Plate
Size |
| Top Plate Size |
Bolt Hole Spacing |
Bolt Size |
| 2 1/2" x 3 5/8" |
1 3/4" x 3" |
5/16" |
|
 |