Capacity up to 900 pounds per
caster. These rugged cold forged casters are recommended only for
manually moved applications. Model 9 is our most popular industrial caster due
to its widespread use throughout industry and its low initial cost. |
You should never select on the basis of
load capacity alone. Capacity ratings do not take into account the effort
required to manually move a load. Capacity ratings are based on manual
operation under ideal conditions. If these casters are going to be moved by
mechanically powered equipment, consult us for a reduced capacity rating based
on your application. Rollability is a function of floor surface, wheel
material, capacity and the environment. If a human being has to move the
weight, select the largest practical wheel diameter.
|
| Any doubt as to
which wheel or caster is the best choice for your application, contact us for a
recommendation. |
Features:
- Swivel Construction - cold forged top plate and
yoke base from 1/4" steel. Swivel has double ball bearing with hardened
raceways.
- Center Pin - 5/8" diameter, rivet or bolt and
nut.
- Legs - 1/4" thick, welded outside only.
- Axle - 1/2'' diameter hollow bolt with lock nut.
- Wheel Bearing - R= Roller Bearing,
B= Ball
Bearings, D= Delrin Bearings, PS= Precision Sealed Ball Bearings, P= Plain
Bore
- Grease Fittings - for swivel and wheel
bearings.
- Finish - external metal parts are zinc plated
|
|
Optional Features:
Wheel Brake TB - Pedal on side of Wheel Locks top of
wheel. |
Sealed
Precision Ball Bearings
- PS - Sealed Precision Ball
Bearings increase rollability and are maintenance free. Available on Non-Metal
Center Wheels. |
 |
| Wheel
Brakes are not designed to hold on inclines. |
| Swivel Lock - SL4 - Welded - Locks Swivel, NOT wheel. |
 |
 |
This caster is
also available in Stainless Steel. Click Here. |
| Also Available:
Swivel-EAZ
Polyurethane Wheel |
 |
- Each wheel has two independent rotating surfaces which
enhance capacity and swivel ease.
- They are ergonomically designed to minimize the force
required to initially start an object as well as the force required to keep it
in motion.
- They improve safety for your employees by reducing the
risk of injury.
- The heavy duty aluminum centers are equipped with extra
large sealed precision ball bearings which require NO maintenance.
Click
here |
|
| Also Available:
Floor Truck
Locks |
 |
Floor Truck Locks are used to hold equipment in place on
level floors only. When you step on the activation pedal, a rubber pad comes in
contact with the floor providing friction so that the equipment will not move.
Floor Locks are not designed to lift the equipment. Install between swivel
casters. Release rubber pad by stepping on either of the Release Pedals.
Click
here. |
|
| Click Here to see ALL available
sizes, wheels and to ORDER. |
 Green Polyurethane on Iron Swivel Caster |
 Red Polyurethane on Iron Swivel Caster |
 Polyurethane on Polyolefin Blue/Black |
 Polyurethane on Polyolefin Maroon/Gray |
 Polyurethane on Glass-Filled Nylon Swivel Caster |

Polyurethane on Iron Blue Crown Tread Swivel
Caster |

All Polyurethane Swivel Caster |

All Polyurethane Swivel Caster |
 Polyurethane on Aluminum Crown
Tread Swivel Caster |

Gray Soft Rubber Crown Tread Swivel Caster |
 Super
Cushion Rubber Swivel Caster Pneumatic
Alternative |
 Gray Soft Rubber Flat
Tread Swivel Caster |
 Conventional Rubber on Iron Swivel Caster |

Phenolic Swivel Caster |

Polyolefin Swivel Caster |
 High Temperature Glass - Nylon Swivel Caster |
 High Temperature Phenolic Swivel Caster |

Ductile Steel Swivel Caster |

Gray Iron Swivel Caster |
 V Groove Ductile Steel Rigid Caster |
| Photos
are only a sample of available products. To see all available products &
sizes, Scroll Down or Click Here. |
|
|
|
| Click
HERE to see our Quick Change Plate. |