These casters have a low initial cost. They were designed for
intermittent usage ( light duty ) on manually moved equipment, rolling on
smooth floors, in applications where there is no abuse. The swivel has a double
ball bearing. The gray soft non-marking rubber wheels provide floor protection
and quiet operation. The polyolefin wheels are best when loads are to be left
parked for prolonged periods.
You may want to consider our caster Model
3. It represents a better return on your investment because it provides higher
capacity, easier rolling, longer caster life and a wider selection of wheels.
Mounting Plate - 2 1/2" x
3 5/8"
We suggest that you do NOT drill the mounting holes to
attach the casters until you receive them.
You should never select on the basis of
load capacity alone. Capacity ratings do not take into account the effort
required to manually move a load. Capacity ratings are based on manual
operation under ideal conditions. If these casters are going to be moved by
mechanically powered equipment, consult us for a reduced capacity rating based
on your application. If a human being has to move the weight, select the
largest practical wheel diameter.
Photos
& graphics are for informational purposes only. Actual product may vary
slightly from those shown. Wheel colors may vary unless specified. If wheel
color is important, please contact us for current inventory.
Photos & graphics
are for informational purposes only. Actual product may vary slightly from
those shown. Wheel colors may vary unless specified. If wheel color is
important, please contact us for current inventory.