Chat with us, powered by LiveChat

Foam Filled Pneumatic Casters

These industrial casters are designed for low speed manually moved applications only. Foam Filled Pneumatic Wheels have NO air in the tires, thus eliminating the possibility of the wheels ever going flat.

Foam Filled wheels do NOT have any resilience. They provide the same traction and wide footprint of air filled wheels which enables them to roll on grass, dirt and over small pebbles.

Foam Filled Pneumatic Wheels have a higher initial cost than Air Filled Pneumatic Wheels. However, over time, they may prove to cost less because they last longer and avoid down time due to loss of air. Since people tend to load equipment only to the weight they can move easily,

Foam Filled Pneumatic Wheels can lead to higher productivity because they require less effort to move than pneumatics that are under inflated.

Casters or Wheels Only Chart (Click the Part Number to Order)

We do NOT include mounting Hardware.

Click on the Part Numbers for Pricing, Options and to ORDER.

Nominal
Diam.
Tread
Width
Tire / Wheel
Color
Max
Cap.
Each
Caster
lbs.
Pneumatic
Swivel
Caster Part
Number
Pneumatic
Rigid
Caster Part
Number
Approx
Swivel
Radius
Weight
Lbs.
Approx
Overall
Height
6″2″Black / Zinc2009SF6x2-S-FF9SF6x2-R-FF5  1/2″5  3/47  1/2″
8″3″Black / Zinc2509SF8x3-S-FF9SF8x3-R-FF6  1/2″8  1/210″
10″3  1/2″Black / Zinc3509SF10x3.50-SFF9SF10x3.50-RFF7  1/4″11  1/212  1/4″
Nominal
Diam.
Tread
Width
Tire / Wheel
Color
Max
Cap.
Each
Caster
lbs.
Pneumatic
Swivel
Caster Part
Number
Approx
Swivel
Radius
Weight
Lbs.
Approx
Overall
Height
6″2″Black / Zinc200SF6x2-FF2  1/42  1/2″1/2″
Ball
Bearing
8″3″Black / Zinc250SF8x3-FF4  1/23  1/8″
Gray / ZincSF8x3G-FF
10″3  1/2″Black / Zinc350SF10x3.50-FF7  1/23  7/8″
All Foam Filled Pneumatic Wheels have Ball Bearings. Wheel Brakes appear as an option after you select a swivel pneumatic caster. Capacity ratings are based on use in a manual operation. NOT to be used above 3 mph. For manual use ONLY.

Available Options:

Mounting Plate (4″ x 4 1/2″)

Foam Filled Pneumatic Casters, Caster City

This image is for Plate Size and Hole Placement ONLY. IT DOES NOT DEPICT THE ACTUAL PLATE.

We suggest that you do NOT drill the mounting holes to attach the casters until you receive them.

Wheel Brake

Foam Filled Pneumatic Casters, Caster City

TB: Pedal on side of wheel. 

Detachable Swivel Lock

Locks only the Swivel at 90 degree increments. Does NOT lock the wheel

Industrial & Heavy Duty Casters | Caster City

Disengaged Position

Industrial & Heavy Duty Casters | Caster City

Engaged Position

Foam Filled Pneumatic Casters

You should never select on the basis of load capacity alone. Capacity ratings do not take into account the effort required to manually move a load. Capacity ratings are based on manual operation under ideal conditions. If these casters are going to be moved by mechanically powered equipment, consult us for a reduced capacity rating based on your application. If a human being has to move the weight, select the largest practical wheel diameter.

Industrial & Heavy Duty Casters | Caster City