|
||||||||||||||||||||||||||||
|
|
Forged Steel & Ductile Steel Caster Wheels |
||
|
|
||
| Where loads are too heavy for floor
protective wheels, or where unusually severe service factors are present,
forged steel & Ductile steel caster wheels will do the job. Usually in
these applications the user will not consider floor wear as too great a penalty
considering the work that is being done. Forged steel caster wheels will damage
most factory floors, and thus are generally used on steel plate, in channel, or
as V-groove wheels rolling on angle iron track. Forged steel & Ductile steel caster wheels have high ductility and tensile strength, and thus can absorb shock or impact without failure. These solid (spokeless) wheels are unbreakable in normal service. Their load ratings are limited by bearing capacity only. These steel wheels are capable of temperatures up to 700° F depending upon the application. At temperatures above 400° F continuous, steel roller bearings and spanner bushings can start to anneal. In applications where temperatures are above 400° F, please consult our engineering dept. at 800 - 501 - 3808. |
|
| IS THIS THE RIGHT WHEEL FOR YOUR
APPLICATION?? CLICK TO COMPARE WITH OTHER WHEELS. |
| Click Here to see ALL available WHEEL ONLY sizes and to ORDER. | ||
![]() 6" x 2" Ductile Steel Shown Roller Bearing |
![]() 6" x 3" Ductile Steel Shown Roller Bearing |
![]() 6" x 3" Ductile Steel Shown Tapered Roller Bearing |
| Photos are only a sample of available products. To see all available products & sizes, Scroll Down or Click Here. | ||
| Click on the Part Numbers for Pricing, Options and to ORDER. | ||||||||
| Wheel Diam. |
Tread Width |
Hub Length |
Capacity Lbs. |
|
Bearing I.D. / Type |
I.D. with Spanner |
Approx. Wt. |
|
| Caster Wheel Part Number | ||||||||
| 4" | 2" | 2 3/16" | 1,200 | DS4x2 | 3/4" Roller | 1/2" | 5 | |
| 5" | 2" | 2 3/16" | 1,300 | DS5x2 | 3/4" Roller | 1/2" | 6 | |
| 6" | 2" | 2 3/16" | 1,500 | DS6x2 | 3/4" Roller | 1/2" | 7 | |
| 2 1/2" | 2 3/4" | 3,500 | DS6x2-1/2N | 1" Roller | 3/4" | 12 | ||
| 3" | 3 1/4" | 5,000 | DS6x3 | 1" Roller | 3/4" | 16 | ||
| 3" | 3 1/2" | 5,000 | DS6x3-3/4T | 3/4" Tapered | N/A | 16 | ||
| 3" | 3 1/2" | 10,000 | DS6x3-1T | 1" Tapered | N/A | 16 | ||
| 8" | 2" | 2 3/16" | 1,500 | DS8x2 | 3/4" Roller | 1/2" | 10 1/2 | |
| 3" | 3 1/4" | 5,000 | DS8x3 | 1" Roller | 3/4" | 21 | ||
| 10" | 3" | 3 1/4" | 6,000 | DS10x3 | 1" Roller | 3/4" | 28 | |
"DS" indicates Ductile Steel Caster Wheels. "FS " indicate Forged Steel Caster Wheels. |
( frame ). If the wheel is NOT going into a caster and you want 2 3/16" Hub Length, then specify "With Flat Washers" on your order in the "Special Instructions" section on the checkout page. Wheels with 2 3/16" hub length have a 3/4" ID Roller Bearing and do not come with a spanner. 2 1/2" & 3" wide wheels are furnished with the Hub Length shown in the table above. Flat Steel Thrust Washers and a Spanner Bushing are included. |
| Photos & graphics
are for informational purposes only. Actual product may vary slightly from
those shown. Wheel colors may vary unless specified. If wheel color is important, please contact us for current inventory. |
![]() |