 |
 |
 |
||||||||||||||||||||
|
||||||||||||||||||||||
|
||||||||||||||||||||||||||||
           |
Phenolic Caster Wheels |
||
|
|
||
| Phenolic caster wheels are made from macerated canvas mixed with
phenolic resin, and molded under high pressure and temperature. Its hardness is
comparable to polished maple flooring. Phenolic caster wheels are recommended
for smooth concrete and can be used for storage (standing) loads without
permanent set. These caster wheels are highly resistant to oil, grease,
gasoline and mild acids. It is not recommended for wet applications where the
wheel will be in standing water. They are affected in various degrees by strong
acids and some alkaline solutions. Temperature range is -40° to +250°
F, with intermittent use up to 300° F. Phenolic caster wheels will carry
loads as great as the same size iron wheel. The wheel material may chip or cut
from contact with steel plate or from rolling over steel parts on the floor.
The wheel tread may show wear from repeated travel over rough surfaces. Floor
wear is slight except where floors are already starting to deteriorate. These
wheels can be made with a laminated unmacerated tread to provide 25% more
capacity and greater chip resistance. R = Roller Bearing, D = Delrin Bearings, P = Plain Bore, PS = Precision Sealed Ball Bearings |
| IS THIS THE RIGHT WHEEL FOR YOUR
APPLICATION?? CLICK TO COMPARE WITH OTHER WHEELS. |
| Click Here to see ALL available WHEEL ONLY sizes and to ORDER. | ||||
 6" x 2" Phenolic Wheel Shown with Roller Bearings TM - "Recessed Sides" |
 6" x 2" Phenolic Wheel Shown with Roller Bearings TH - "Straight Sides" |
 6" x 3" Phenolic Wheel Shown with Roller Bearings TH - "Straight Sides" |
 8" x 3" Phenolic Wheel Shown with Roller Bearings TM - "Recessed Sides" |
 5" x 1 1/4" Phenolic Wheel Shown with Plain Bore TM - "Recessed Sides" |
| Photos are only a sample of available products. To see all available products & sizes, Scroll Down or Click Here. | ||||
 |
 |
 |
| WHEELS ONLY | |||||||
| Click on the Wheel ONLY Part Numbers for Pricing and to ORDER. | |||||||
| Wheel Diam. |
Tread Width |
 Hub Length |
 Capacity Lbs. |
|
Bearing I.D. / Type |
I.D.
with Spanner. |
Approx. Wt. |
| Wheel ONLY Part Number | |||||||
| 3" | 1 1/4" | 1 3/8" | 300 | TM3x1-1/4P | 1/2" P | 3/8" | 3/4 |
| 4" | 1 1/4" | 1 3/8" | 300 | TM4x1-1/4P | 1/2" P | 3/8" | 1 |
| 1 1/2" | 1 5/8" | 400 | TM4x1-1/2P | 1 1/2 | |||
| 2" | 2 7/16" | 800 | TM4x2PS | 1/2" PS | N/A | 1 3/4 | |
| TM4x2R | 3/4" R | 1/2" | |||||
| TM4x2D | 3/4" D | ||||||
| 1000 | TH4x2R | 3/4" R | 2 | ||||
| 5" | 1 1/4" | 1 3/8" | 300 | TM5x1-1/4P | 1/2" P | 3/8" | 1 1/2 |
| 1 1/2" | 1 5/8" | 450 | TM5x1-1/2P | 1/2" P | 1 3/4 | ||
| 2" | 2 7/16" | 1000 | TM5x2PS | 1/2" PS | N/A | 2 1/4 | |
| TM5x2R | 3/4" R | 1/2" | |||||
| TM5x2D | 3/4" D | ||||||
| 1200 | TH5x2R | 3/4" R | 2 1/2 | ||||
| 6" | 2" | 2 7/16" | 1200 | TM6x2PS | 1/2" PS | N/A | 2 3/4 |
| TM6x2R | 3/4" R | 1/2" | |||||
| TM6x2D | 3/4" D | ||||||
| 1500 | TH6x2R | 3/4" R | 3 | ||||
| 2 1/2" | 2 3/4" | 1600 | TH6x2-1/2N | 1" R | 3/4" | 4 1/4 | |
| 3" | 3 1/4" | 2000 | TH6x3R | 1" R | 5 1/2 | ||
| 8" | 2" | 2 7/16" | 1400 | TM8x2PS | 1/2" PS | N/A | 4 |
| TM8x2R | 3/4" R | 1/2" | |||||
| TM8x2D | 3/4" D | ||||||
| 2 1/2" | 2 3/4" | 1800 | TM8x2-1/2N | 1" R | 3/4" | 6 | |
| 3" | 3 1/4" | 2500 | TM8x3R | 1" R | 7 1/2 | ||
| 10" | 2 1/2" | 2 3/4" | 1800 | TM10x2-1/2N | 1" R | 3/4" | 7 1/2 |
| 3" | 3 1/4" | 2500 | TM10x3R | 1" R | 10 | ||
| 12" | 2 1/2" | 2 3/4" | 1800 | TM12x2-1/2N | 1" R | 3/4" | 11 1/2 |
| 3" | 3 1/4" | 3000 | TM12x3R | 1" R | 13 | ||
"TM" indicates caster wheels with RECESSED SIDES. "TH" indicates caster wheels with STRAIGHT SIDES. |
You should never select on the basis of
load capacity alone. Capacity ratings do not take into account the effort
required to manually move a load. Capacity ratings are based on manual
operation under ideal conditions. If these wheels are going to be moved by
mechanically powered equipment, consult us for a reduced capacity rating based
on your application |
 |
| Photos & graphics
are for informational purposes only. Actual product may vary slightly from
those shown. Wheel colors may vary unless specified. If wheel color is important, please contact us for current inventory. |
  |
|
|
