|
|
| Plate Casters Listed by Capacity - 300 lbs to 17,000
lbs |
Model 3
UP to
300 lbs - 3" thru 5" Wheels
Small Plate |
 |
| Click here for
More Information |
Capacity up to 300 pounds per caster. These
institutional casters are ideal for most types of institutional equipment, and
are offered with a wide selection of wheels.
Features: * Swivel
Construction - Stamped steel. Swivel has double ball bearing with hardened
raceways. Metal cover shields swivel bearings from dirt and dust. * Center Pin
- 1/2" diameter steel rivet. * Axle - 3/8" diameter bolt with lock nut. * Wheel
Bearing - PS= Precision Sealed Ball Bearings, B= Ball Bearings, D= Delrin
Bearings, P= Plain Bore * Finish - external metal parts are Zinc plated. |
|
Model
3A
UP to 300 lbs - 3" thru 5" Wheels
|
Also
Available in Stainless Steel |
| Click
here for More Information |
| Capacity up to 300 pounds per caster. These
institutional casters are ideal for any light duty application where the caster
must be totally immobile when the caster brake is applied. Caster Model 3A has
a unique brake which locks both the wheel and the swivel bearing at the same
time. This "Total-Lock" brake insures that the swivel caster will not turn when
the wheel is locked. This combination wheel brake and swivel lock is essential
for safety in some applications - such as on worktables, tablesaws, and medical
equipment. The Total-Lock brake is desireable whenever a brake is needed
because it makes a swivel caster totally immobile. The wheels featured with
Caster Model 3A are non-marking, and all except Polyolefin can be used on
hardwood floors. Polyolefin wheels are best at reducing the risk of a flat spot
occuring when loads are left standing for prolong periods. Gray Soft Rubber and
Polyurethane wheels have a sealed precision ball bearing. They provide floor
and cargo protection, quiet operation, and are very easy rolling. Try a set of
4 casters. You will be amazed at their performance! |
|
Model
K3A
UP to 300 lbs - 3" thru 5" Wheels
|
 |
| Click
here for More Information |
| Capacity up to 300 pounds per caster. These
institutional casters are ideal for any light duty application where the caster
must be totally immobile when the caster brake is applied. Caster Model K3A has
a unique brake which locks both the wheel and the swivel bearing at the same
time. This "Total-Lock" brake insures that the swivel caster will not turn when
the wheel is locked. This combination wheel brake and swivel lock is essential
for safety in some applications - such as on worktables, tablesaws, and medical
equipment. The Total-Lock brake is desireable whenever a brake is needed
because it makes a swivel caster totally immobile. The wheels featured with
Caster Model K3A are non-marking, and all except Polyolefin can be used on
hardwood floors. Polyolefin wheels are best at reducing the risk of a flat spot
occuring when loads are left standing for prolong periods. Gray Soft Rubber and
Polyurethane wheels have a sealed precision ball bearing. They provide floor
and cargo protection, quiet operation, and are very easy rolling. Try a set of
4 casters. You will be amazed at their performance! |
|
|
|
Model K3
UP
to 300 lbs - 3" thru 5" Wheels
Large Plate |
 |
| Click here for
More Information |
Capacity up to 300 pounds per caster. These
institutional casters are ideal for most types of institutional equipment, and
are offered with a wide selection of wheels.
Features: * Swivel
Construction - Stamped steel. Swivel has double ball bearing with hardened
raceways. Metal cover shields swivel bearings from dirt and dust. * Center Pin
- 1/2" diameter steel rivet. * Axle - 3/8" diameter bolt with lock nut. * Wheel
Bearing - PS= Precision Ball Bearings, B= Ball Bearings, P= Plain Bore * Finish
- external metal parts are Zinc plated. |
|
Model 9
UP to
900 lbs - 3 1/4" thru 8" Wheels
|
 |
| Click here for
More Information |
Capacity up to 900 pounds per caster. These rugged cold
forged casters are recommended only for manually moved applications. Model 9 is
our most popular industrial caster due to its widespread use throughout
industry and its low initial cost.
Features: * Swivel Construction -
cold forged top plate and yoke base from 1/4" steel. Swivel has double ball
bearing with hardened raceways. * Center Pin - 5/8" diameter, rivet or bolt and
nut. * Legs - 1/4" thick, welded outside only. * Axle - 1/2'' diameter hollow
bolt with lock nut. * Wheel Bearing - R= Roller Bearing, B= Ball Bearings, D=
Delrin Bearings, PS= Precision Sealed Ball Bearings, P= Plain Bore * Grease
Fittings - for swivel and wheel bearings. * Finish - external metal parts are
zinc plated |
|
Model
9A
UP to 900 lbs - 4" thru 8" Wheels
|
 |
| Click
here for More Information |
Capacity up to 900 pounds per caster. These Industrial
Casters are used where the caster must be totally immobile when the caster
brake is applied. Caster Model 9A has a unique brake which locks both the wheel
and the swivel bearing at the same time. This "Total-Lock" brake insures that
the swivel caster will not turn when the wheel is locked. This combination
wheel brake and swivel lock is essential for safety in some applications - such
as on worktables, machines and large mobil racks. The total-locking brake is
desireable whenever a swivel caster must be totally immobile.
Features:
* Swivel Construction - cold forged top plate and yoke base from 1/4" steel.
Swivel has double ball bearing with hardened raceways. * Center Pin - 5/8"
diameter, rivet or bolt and nut. * Legs - 1/4" thick. * Axle - 1/2'' diameter
hollow bolt with lock nut. * Wheel Bearing - R= Roller Bearing, B= Ball
Bearings, D= Delrin Bearings, P= Plain Bore * Grease Fittings - for swivel and
wheel bearings. * Finish - external metal parts are zinc plated |
|
Model 14
UP
to 1,400 lbs - 4" thru 8" Wheels
|
 |
| Click here for
More Information |
Capacity up to 1,400 pounds per caster. Model 14 is a
cold forged caster with a larger swivel bearing and center pin than Model 9. It
can be used for up to 1400 lbs per caster on manually moved equipment. If this
caster is to be used with mechanically powered equipment we suggest not
exceeding a weight of 800 lbs per caster. As a general rule you get a better
return on your investment if you step up to Caster Model G15 or Caster Model 15
with 2" wide wheels.
Features: * Swivel Construction - cold forged top
plate and yoke base from 1/4" steel. Swivel has double ball bearing with
hardened raceways. * Center Pin 3/4" diameter rivet or bolt and nut. * Legs -
1/4" thick, welded outside only. * Axle - 1/2'' diameter hollow bolt with lock
nut. * Wheel Bearing -3/4" I.D. hardened straight roller bearings. * Grease
Fittings - for swivel and wheel bearings. * Finish - external metal parts are
zinc plated. |
|
Model
G15
UP to 1,500 lbs - 4" thru 8" Wheels
Small Plate |
 |
| Click here for
More Information |
Capacity up to 1,500 pounds per caster. Model 15 begins
our industrial casters with precision machined swivel bearings. This design
provides superior performance on both manually moved and mechanically powered
equipment. Benefits include easier swiveling, reduced swivel vibration, and
longer trouble free performance. Although this caster has the same wheels as
shown in Caster Model 9, Model G15 is TWICE as good from the standpoint of
performance and expected length of life.
Features: * Swivel
Construction - precision machined combination load and thrust bearing with heat
treated raceway. No center pin. * Legs - 1/4" thick, welded inside and out. *
Axle - 1/2'' diameter hollow bolt with lock nut. * Wheel Bearing - R= Roller
Bearing, B= Ball Bearings, D= Delrin Bearings, PS= Precision Sealed Ball
Bearings, P= Plain Bore * Grease Fittings - for swivel and wheel bearings. *
Finish - external metal parts are zinc plated. |
|
Model 15
UP
to 1,500 lbs - 4" thru 8" Wheels
Large Plate |
 |
| Click here for
More Information |
Capacity up to 1,500 pounds per caster. Model 15
casters have precision machined swivel bearings. This design provides superior
performance on both manually moved and mechanically powered equipment. Benefits
include easier swiveling, reduced swivel vibration, and longer trouble free
performance.
Features: * Swivel Construction - precision machined
combination load and thrust bearing with heat treated raceway. No center pin. *
Legs - 1/4" thick, welded inside and out. * Axle - 1/2'' diameter hollow bolt
with lock nut. * Wheel Bearing - 3/4" I.D. hardened straight roller bearings.
CB wheels have ball bearings. * Grease Fittings - for swivel and wheel
bearings. * Finish - external metal parts are zinc plated. |
|
Model 30
UP
to 3,000 lbs - 6" thru 10" Wheels |
 |
| Click here for
More Information |
Capacity up to 3,500 pounds per caster. Model 30
features a large swivel and wheel bearing which allows for heavy loads and more
arduous service. Model 30 has a precision machined swivel bearing, which
provides superior performance on both manually moved and mechanically powered
equipment. Benefits include easier swiveling, reduced swivel vibration, and
longer trouble free performance. All wheels shown in Model 30 can be furnished
in Caster Model 50 if your application requires a more rugged caster bracket.
Features: * Swivel Construction - precision machined combination load
and thrust bearing with heat treated raceway. No center pin. * Legs - 3/8"
thick, welded inside and out. * Axle - 3/4'' diameter hollow bolt with lock
nut. * Wheel Bearing - 1" I.D. hardened straight roller bearings. * Grease
Fittings - for swivel and wheel bearings. * V Groove Width - 7/8" Standard. *
Finish - external metal parts are zinc plated. |
|
Model 50
UP
to 5,000 lbs - 6" thru 12" Wheels |
 |
| Click here for
More Information |
Capacity up to 5,000 pounds per caster. Model 50 has a
large top plate and thick legs, which allow for heavy loads and more arduous
service. Model 50 has a precision machined swivel bearing, which provides
superior performance on both manually moved and mechanically powered equipment.
Benefits include easier swiveling, reduced swivel vibration, and longer trouble
free performance.
Features: * Swivel Construction - precision machined
combination load and thrust bearing with heat treated raceway. No center pin. *
Legs - 3/8" thick, welded inside and out. * Axle - 3/4'' diameter hollow bolt
with lock nut. * Wheel Bearing - 1" I.D. hardened straight roller bearings.
Items marked *T have 3/4" Tapered Roller Bearings. * Grease Fittings - for
swivel and wheel bearings. * V Groove Width - 7/8" Standard. * Finish -
external metal parts are zinc plated. |
|
Model
100
UP to 10,000 lbs - 6" thru 12" Wheels |
 |
| Click here for
More Information |
Capacity up to 10,000 pounds per caster. Model 100 has
a large top plate and thick legs, which allow for heavy loads and more arduous
service. Model 100 has a precision machined swivel bearing, which provides
superior performance on both manually moved and mechanically powered equipment.
Benefits include easier swiveling, reduced swivel vibration, and longer trouble
free performance.
Features: * Swivel Construction - precision machined
combination load and thrust bearing with heat treated raceway. No center pin. *
Legs - 3/8" thick, welded inside and out. * Axle - 1'' diameter solid bolt with
lock nut on 3" wide wheels. * Axle - 1 1/4'' diameter solid bolt with lock nut
on 4" wide wheels. * Wheel Bearing - 1" tapered roller bearings on 3" wide
wheels. * Wheel Bearing - 1 1/4" tapered roller bearings on 4" wide wheels. *
Grease Fittings - for swivel and wheel bearings. * V Groove Width - 1 3/8"
Standard. * Finish - Brackets are zinc plated. Ductile steel wheels are
painted. |
|
Model 2-50, 2-100 & 2-150
UP to 10,000 lbs - 6" thru 12"
Wheels
Dual Wheel |
 |
| Click here for More Information |
Dual Wheel casters provide a higher load capacity with
a minimal overall height. The larger footprint ( two wheels instead of one )
enhances stability and spreads the load over a larger floor area. The
differential action inherent in all swivel dual wheel designs minimizes the
effort required to change directions. We chose to show only our highest
capacity polyurethane wheels because they minimize floor wear. If your
application requires ductile steel wheels, please contact us for pricing.
Features: * Hot forged steel precision machined swivel bearings. * No
center pin to fail in arduous applications. * Tapered roller bearings are
standard in wheels to withstand side thrust. * All wheels have extra high
capacity polyurethane tires to provide floor protection and to minimize the
chance of the tires developing a flat spot under load. * Zerk fittings to
lubricate swivel and wheel bearings. * Zinc plated finish for added rust
resistance. |
|
Model
150
UP to 15,000 lbs - 8" thru 12" Wheels
|
 |
| Click here for
More Information |
Capacity 20,000 pounds per caster. Model 150 is capable
of loads up to 20,000 Lbs. per caster under ideal operating conditions. We
feature this model at 15,000 Lbs. capacity because caster applications almost
never involve ideal operating conditions. If your application requires more
than 15,000 Lbs. capacity per caster, please contact us for a recommendation.
Features: * Swivel Construction - a precision machined swivel bearing
provides easier swiveling, reduced swivel vibration and longer trouble free
performance. * Legs - 1/2" thick steel. * Axle - 1 1/4" diameter bolt. * Wheel
Bearing - 1 1/4" tapered roller bearings. * Grease Fittings - for swivel and
wheel bearings. * Finish - external metal parts are zinc plated. |
|
Model
B150
UP to 15,000 lbs - 8" thru 12" Wheels
|
 |
| Click here
for More Information |
Capacity 20,000 pounds per caster. Model B150 is
designed for the heaviest caster applications. We feature this caster at up to
15,000 Lbs. capacity per caster. Modification can be made to provide 20,000
Lbs. capacity per caster when needed. Model B150 is almost exclusively used in
conjunction with mechanically powered equipment. Two precision machined swivel
bearings provide easier swiveling, reduced swivel vibration, and longer trouble
free performance. Load ratings are based on a speed up to 3 mph under ideal
operating conditions. Since it is rare for a caster application to involve
ideal operating conditions, we suggest you rely on our experienced and
knowledgeable staff for a written recommendation.
Features: * Swivel
Construction - Two precision machined swivel bearings * Legs - 1/2" thick
formed steel. * Axle - 1 1/4" diameter bolt. * Wheel Bearing - Two 1 1/4"
tapered roller bearings. * Grease Fittings - for swivel and wheel bearings. *
Finish - external metal parts are painted. |
|
Super Caster
- 8"and 10" Wheels
|
 |
| Click here
for More Information |
SELF-ENERGIZING rubber wheels require the lowest draw
bar effort ever devised in any resilient tread wheel. The prestressed rubber
tire resists flattening under load, reduces "scrubbing" action when turning,
and actually helps to roll the load. A minimum starting effort, and an
extremely small draw bar pull to maintain motion (60% less than conventional
rubber), allows one man to move loads (up to 3000 lbs.) that before required
several men. Vertical bonding (with approximately seven times the area of
conventional wheels) eliminates bond failure as a cause for wheel replacement.
The steel side discs dissipate heat so that the tire remains cool after hours
of uninterrupted operation. Sealed tapered roller bearings are pre-adjusted in
the wheel to assure they always maintain proper adjustment.
The
SELF-ENERGIZING Wheel can be the least expensive rubber wheel because your
people do more with less energy expenditure ... because it prevents injuries
due to excessive strain ... protects floors because shock and impact of hard
tread wheels are replaced with resiliency ... saves you money by increasing
efficiency and production, reducing overhead costs and prolonging equipment
life.
The SELF-ENERGIZING Wheel performs at maximum efficiency when mounted
in a Super Swivel Assembly. The caster swivels friction free on two sealed
tapered roller bearings. High tensile corrosion resistant aluminum alloy forks
have the correct offset for perfect swiveling with rubber tired wheels.
Vibration and shimmy are minimized.
The SUPER CASTER with the
SELF-ENERGIZING rubber wheel is the ultimate caster instrument - providing ease
of start - minimum rolling resistance - lowest cost per mile or hour of
operation. There is nothing else comparable in caster performance and long
life. |
|
|
