Theatrical and Stage Casters for Scenery

• This swivel mechanism functions like a lazy susan. It can be used to make a turntable or for most applications that require two surfaces to rotate.
• It is popular on dollies used in the theatrical industry to move scenery.
• Offered in a Zinc plated finish to bolt on or Un-Painted finish to bolt on or be welded.
• Capacity: 2500 Lbs.
• Overall Height: 1 9/16"
• Plate Size: 4" x 4 1/2"
• Bolt Hole Spacing: 2 5/8" x 3 5/8" slotted to 3" x 3"
• Bolt Size: 3/8"

• Capacity up to 200 lbs. per caster.
• Caster overall height is 4".
• This caster has two 3" x 7/8" non-marking gray soft rubber ball bearing wheels.
• For use on Painted Masonite, Plywood, Hardwood, Linoleum or Concrete.
• Soft rubber provides a cushioned ride protecting cargo as well as floor surfaces. It also reduces noise and vibration.
• The resilience of soft rubber enables these wheels to roll over obstructions better than hard wheels.
• The wider footprint provided by two wheels allows you to cross winch tracks, gaps and grooves in the floor easily.
• The combination of a larger surface area enables a higher capacity without increasing overall height.
• The differential action provided by two wheels enables the caster to swivel easier than a single wheel having the same size footprint.
• Plate size 2 3/8" x 2 3/8".
• Hole spacing 1 1/2" x 1 1/2" to 1 7/8" x 1 7/8".

• Capacity up to 135 lbs. per caster.
• Caster overall height is 2 7/8".
• Two 2" x 7/8" non-marking gray soft rubber ball bearing wheels.
• Soft rubber provides a cushioned ride protecting cargo as well as floor surfaces. It also reduces noise and vibration.
• The resilience of soft rubber enables these wheels to roll over obstructions better than hard wheels.
• The wider footprint provided by two wheels allows you to cross winch tracks, gaps and grooves in the floor easily.
• The combination of a larger surface area enables a higher capacity without increasing overall height.
• The differential action provided by two wheels enables the caster to swivel easier than a single wheel having the same size footprint.
• Plate size 2 3/8" x 2 3/8".
• Hole spacing 1 1/2" x 1 1/2" to 1 7/8" x 1 7/8".
• Available with or without Total Locking Brake.

• Capacity: up to 200 Lbs. each
• Overall Height: 4 1/8"
• A single 3" x 1 1/4" Red Polyurethane ball bearing wheel.
• For use on Ground Cloth, Dance Floor Matting, Sheet Vinyl, Concrete, Hardwood, Linoleum and Carpeted Stages.
• Popular on dollies having 3 swivel casters used in the theatrical industry to move scenery.
• Plate Size: 2 1/2" x 3 5/8"
• Overall Height: 4 1/16"
• Bolt Hole Spacing: 1 3/4" x 2 15/16"
• Bolt Size: 5/16"

• Requires 14" miniumum rotational clearance.
• Overall height is 5 1/2" with 3" dual wheel gray soft rubber casters. Dolly capacity 600 lbs.