Stainless Steel Total Locking Casters
Stainless Caster Model 3A - Plate Mount

Capacity up to 300 pounds per caster.
Stainless steel casters are ideal for use in a wet or corrosive environment.

These casters are ideal for most light duty applications where a caster must be totally immobile when the caster brake is applied. Caster Model 3A has a unique brake which locks both the wheel and the swivel bearing simultaneously. This "Total-Lock" brake insures that the swivel caster will not turn when the wheel is locked. This combination wheel brake and swivel lock is essential for safety in some applications - such as on worktables and medical equipment. The Total-Lock brake is desireable whenever a brake is needed because it makes a swivel caster totally immobile.

Mounting Plate - 2 5/8" x 3 3/4"
This image is for Plate Size and Hole Placement ONLY. IT DOES NOT DEPICT THE ACTUAL PLATE.
We suggest that you do NOT drill the mounting holes to attach the casters until you receive them.
We do NOT include mounting Hardware.

Click here for a Stem Mount Version
All stainless steel is
NOT necessarily non-magnetic.

Click Here
You should never select on the basis of load capacity alone. There is no industry standard for load capacity ratings and they may not include a factor for abuse. Our capacity ratings are below what the casters are capable of carrying because most applications have less than perfect conditions. Please refer to the information shown at the bottom of this page. If you have any doubt as to which wheel or caster is the BEST choice for your application contact us for a recommendation.

CALL US AT 800-501-3808

Features:  
 
  • Swivel Construction - Stamped stainless steel. Swivel has double ball bearing.
  • Gray Non-marking Soft Rubber, Gray Polyurethane, Black/Gray Polyurethane, Blue/Gray, Red/Gray and Orange/Gray Polyurethane Wheels have precision sealed ball bearings ( PS ) shielded by full thread guards. Polyolefin wheels do not have ball bearings in the wheel ( P ).
Notes:
  • These rubber & polyurethane wheels are NOT for use in a rack washer.
  • We have a special polyurethane wheel for use on racks or carts that are cleaned in a rack washer. Please call.
Total-Lock Brake:  
Total Lock Brake in the
Un-Locked Position
Total Lock Brake in the Locked Position
Total-Lock Brake:
  • Combination Wheel Brake and Swivel Lock - This brake simultaneously locks the wheel and the swivel. One step on the activating pedal instantly locks the entire caster holding the equipment firmly in place. One step on the release pedal frees the swivel and wheel.
Caster Photos are with 5" Wheels - 3", 4" and 5" are available.

Gray Rubber
Un-Locked Position

Gray Polyurethane
Un-Locked Position

Black Polyurethane
Un-Locked Position

Red Polyurethane
Un-Locked Position

Blue Polyurethane
Un-Locked Position


All Polyurethane
Un-Locked Position

Polyolefin
( Industrial Plastic )
Un-Locked Position


Gray Polyurethane
Swivel Caster


Black Polyurethane
Swivel Caster


Gray Rubber
Rigid Caster
We do NOT include mounting Hardware.
Click on the Part Numbers for Pricing, Options and to ORDER.
Caster
Wheel
Diam.
Tread
Width
Click here
to compare
wheel materials.
Std
Brg
Type

Max
Cap.
Each
Caster
lbs.
Click Part Numbers Below
For Price and to Order
Approx
Swivel
Weight
lbs.
Overall
Height

Wheel Tread Material
Click to see Wheel
Swivel Caster w/
Total-Lock Brake
Swivel Caster
( No Brake )
Rigid Caster
( No Brake )
Buy it Now Buy it Now Buy it Now
3" 1 1/4" Gray Soft Rubber PS 150 SS-3ARF3-SML SS-3ARF3-S SS-3ARF3-R 2 4 1/4"
Gray Polyurethane PS 200 SS-3AGP3-SML SS-3AGP3-S SS-3AGP3-R
Black/Gray Polyurethane PS 200 SS-3ABK3-SML SS-3ABK3-S SS-3ABK3-R
Red/Gray Polyurethane PS 200 SS-3ARG3-SML SS-3ARG3-S SS-3ARG3-R
Blue/Gray Polyurethane PS 200 SS-3ABP3-SML SS-3ABP3-S SS-3ABP3-R
All Polyurethane D 200 SS-3AAP3-SML SS-3AAP3-S SS-3AAP3-R
Polyolefin - Black P 240 SS-3APB3-SML SS-3APB3-S SS-3APB3-R
4" 1 1/4" Gray Soft Rubber PS 200 SS-3ARF4-SML SS-3ARF4-S SS-3ARF4-R 2 5 1/4"
Gray Polyurethane PS 250 SS-3AGP4-SML SS-3AGP4-S SS-3AGP4-R
Black/Gray Polyurethane PS 250 SS-3ABK4-SML SS-3ABK4-S SS-3ABK4-R
Red/Gray Polyurethane PS 250 SS-3ARG4-SML SS-3ARG4-S SS-3ARG4-R
Blue/Gray Polyurethane PS 250 SS-3ABP4-SML SS-3ABP4-S SS-3ABP4-R
All Polyurethane D 300 SS-3AAP4-SML SS-3AAP4-S SS-3AAP4-R
Polyolefin - Black P 300 SS-3APB4-SML SS-3APB4-S SS-3APB4-R
5" 1 1/4" Gray Soft Rubber PS 250 SS-3ARF5-SML SS-3ARF5-S SS-3ARF5-R 2 1/2 6 1/4"
Gray Polyurethane PS 250 SS-3AGP5-SML SS-3AGP5-S SS-3AGP5-R
Black/Gray Polyurethane PS 250 SS-3ABK5-SML SS-3ABK5-S SS-3ABK5-R
Red/Gray Polyurethane PS 250 SS-3ARG5-SML SS-3ARG5-S SS-3ARG5-R
Blue/Gray Polyurethane PS 250 SS-3ABP5-SML SS-3ABP5-S SS-3ABP5-R
All Polyurethane D 300 SS-3AAP5-SML SS-3AAP5-S SS-3AAP5-R
Polyolefin - Black P 300 SS-3APB5-SML SS-3APB5-S SS-3APB5-R


- Swivel Radius for Casters with the Total-Lock Brake - 4 3/8"

Use the Polyolefin ( Industrial Plastic ) wheel for "Standing Loads". Polyolefin wheels eliminate the possiblilty of a flat spot developing on the surfiace of polyurethane and rubber tires when the weight exceeds 2/3 of the rated capacity when the object is left parked most of the time .

You should never select on the basis of load capacity alone. Capacity ratings do not take into account the effort required to manually move a load. Capacity ratings are based on manual operation under ideal conditions. If these casters are going to be moved by mechanically powered equipment, consult us for a reduced capacity rating based on your application.

Photos & graphics are for informational purposes only. Actual product may vary slightly from those shown.
Wheel colors may vary unless specified. If wheel color is important, please contact us for current inventory.