|
|
|
|
| Total Locking Plate Casters Listed by Capacity - 200
lbs to 900 lbs |
Model 2-2B
UP to 200 lbs - 2" & 3"
Wheels |
 |
| Click here for More Information |
Capacity up to 200 pounds per caster.
These casters are available with both 2" and 3" wheels.
Features: * Two
2" and 3" non-marking gray soft rubber ball bearing wheels. * Soft rubber
provides a cushioned ride protecting cargo as well as floor surfaces. It also
reduces noise and vibration. * The resilience of soft rubber enables these
wheels to roll over obstructions better than hard wheels. * The wider footprint
provided by two wheels allows you to cross winch tracks, gaps and grooves in
the floor easily. * The combination of a larger surface area enables a higher
capacity without increasing overall height. * The differential action provided
by two wheels enables the caster to swivel easier than a single wheel having
the same size footprint. * Total Locking brake locks both the swivel and the
wheel. * Available with or without Total Locking Brake. |
|
Model
3A
UP to 300 lbs - 3" thru 5"
Wheels |
Also
Available in
Stainless Steel |
| Click
here for More Information |
| Capacity up to 300 pounds per caster.
These institutional casters are ideal for any light duty application where the
caster must be totally immobile when the caster brake is applied. Caster Model
3A has a unique brake which locks both the wheel and the swivel bearing at the
same time. This "Total-Lock" brake insures that the swivel caster will not turn
when the wheel is locked. This combination wheel brake and swivel lock is
essential for safety in some applications - such as on worktables, tablesaws,
and medical equipment. The Total-Lock brake is desireable whenever a brake is
needed because it makes a swivel caster totally immobile. The wheels featured
with Caster Model 3A are non-marking, and all except Polyolefin can be used on
hardwood floors. Polyolefin wheels are best at reducing the risk of a flat spot
occuring when loads are left standing for prolong periods. Gray Soft Rubber and
Polyurethane wheels have a sealed precision ball bearing. They provide floor
and cargo protection, quiet operation, and are very easy rolling. Try a set of
4 casters. You will be amazed at their performance! |
|
Model
K3A
UP to 300 lbs - 3" thru 5" Wheels |
 |
| Click
here for More Information |
| Capacity up to 300 pounds per caster.
These institutional casters are ideal for any light duty application where
the caster must be totally immobile when the caster brake is applied. Caster
Model K3A has a unique brake which locks both the wheel and the swivel bearing
at the same time. This "Total-Lock" brake insures that the swivel caster will
not turn when the wheel is locked. This combination wheel brake and swivel lock
is essential for safety in some applications - such as on worktables,
tablesaws, and medical equipment. The Total-Lock brake is desireable whenever a
brake is needed because it makes a swivel caster totally immobile. The wheels
featured with Caster Model K3A are non-marking, and all except Polyolefin can
be used on hardwood floors. Polyolefin wheels are best at reducing the risk of
a flat spot occuring when loads are left standing for prolong periods. Gray
Soft Rubber and Polyurethane wheels have a sealed precision ball bearing. They
provide floor and cargo protection, quiet operation, and are very easy rolling.
Try a set of 4 casters. You will be amazed at their performance! |
|
|
|
Model E
UP to 250 lbs - 4" thru 8" Wheels |
 |
| Click here for More Information |
This elegant caster is popular with designers because
of its European style characterized by smooth clean lines. Furniture designers
have chosen this caster with the 8" wheels and a threaded stem to be the four
legs of a contemporary glass coffee table. Precision sealed swivel and wheel
bearings guarantee this caster to be maintenance free. The strong nylon caster
frame ( body ) and non-marking gray soft rubber wheels make this caster ideal
for many medical, hospital, food service and institutional ( school )
applications.
Features: * Swivel Frame - made with extra thick nylon
for added strength and to maintain a sleek appearance. * Bearings - Precision
Sealed Ball Bearings in the swivel and the wheel for easy rotation and zero
maintenance. * Non-Marking Gray Soft Rubber tires provide quiet operation and a
cushion ride. * Available in a Plain Swivel - No Brake - No Lock, Swivel with a
Total Lock Brake and Swivel with a Directional Lock. * Resistant to most
chemicals and cart washable. * Operating Temperature: - Up to 159° F. |
|
Model
4A
UP to 400 lbs - 4" thru 6" Wheels |
 |
| Click
here for More Information |
| Capacity up to 400 pounds per caster with a
small mounting plate size 2 1/2" x 3 3/4". These casters are ideal for
applications where the caster must be totally immobile when the caster brake is
applied. Caster Model 4A has a unique brake which locks both the wheel and the
swivel bearing at the same time. This "Total-Lock" brake insures that the
swivel caster will not turn when the wheel is locked. This combination wheel
brake and swivel lock is essential for safety in applications - such as on
worktables, tablesaws, and medical equipment. The Total-Lock brake is
desireable whenever a brake is needed because it makes a swivel caster totally
immobile. The wheels featured with Caster Model 4A are non-marking, and all
except Polyolefin and Phenolic can be used on hardwood floors. Polyolefin and
Phenolic wheels are best at reducing the risk of a flat spot occuring when
loads are left standing for prolonged periods. All the wheels have a precision
sealed ball bearings for easier rolling. Gray Soft Rubber and Polyurethane
wheels provide quiet operation, floor and cargo protection. |
|
Model
9A
UP to 900 lbs - 4" thru 8" Wheels |
 |
| Click
here for More Information |
Capacity up to 900 pounds per caster. These
Industrial Casters are used where the caster must be totally immobile when the
caster brake is applied. Caster Model 9A has a unique brake which locks both
the wheel and the swivel bearing at the same time. This "Total-Lock" brake
insures that the swivel caster will not turn when the wheel is locked. This
combination wheel brake and swivel lock is essential for safety in some
applications - such as on worktables, machines and large mobil racks. The
total-locking brake is desireable whenever a swivel caster must be totally
immobile.
Features: * Swivel Construction - cold forged top plate and
yoke base from 1/4" steel. Swivel has double ball bearing with hardened
raceways. * Center Pin - 5/8" diameter, rivet or bolt and nut. * Legs - 1/4"
thick. * Axle - 1/2'' diameter hollow bolt with lock nut. * Wheel Bearing - R=
Roller Bearing, B= Ball Bearings, D= Delrin Bearings, P= Plain Bore * Grease
Fittings - for swivel and wheel bearings. * Finish - external metal parts are
zinc plated |
|
|
| Total Locking Stem Casters Listed by Capacity - 250 lbs to 300
lbs |
Model
3A
UP to 300 lbs - 3" thru 5" Wheels |
 |
| Click here
for More Information |
| Capacity up to 300 pounds per caster. These
institutional casters are ideal for any light duty application where the caster
must be totally immobile when the caster brake is applied. Caster Model 3A has
a unique brake which locks both the wheel and the swivel bearing at the same
time. This "Total-Lock" brake insures that the swivel caster will not turn
when the wheel is locked. This combination wheel brake and swivel lock is
essential for safety in some applications - such as on worktables, tablesaws,
and medical equipment. The Total-Lock brake is desireable whenever a brake is
needed because it makes a swivel caster totally immobile. The wheels featured
with Caster Model 3A are non-marking, and all except Polyolefin can be used on
hardwood floors. Polyolefin wheels are best at reducing the risk of a flat spot
occuring when loads are left standing for prolong periods. Gray Soft Rubber and
Polyurethane wheels have a sealed precision ball bearing. They provide floor
and cargo protection, quiet operation, and are very easy rolling. Try a set of
4 casters. You will be amazed at their performance! |
|
Model
K3A
UP to 300 lbs - 3" thru 5" Wheels |
 |
| Click
here for More Information |
Capacity up to 300 pounds per caster.
These
institutional casters are ideal for any light duty application where the caster
must be totally immobile when the caster brake is applied. Caster Model K3A has
a unique brake which locks both the wheel and the swivel bearing at the same
time. This "Total-Lock" brake insures that the swivel caster will not turn
when the wheel is locked. This combination wheel brake and swivel lock is
essential for safety in some applications - such as on worktables, tablesaws,
and medical equipment. The Total-Lock brake is desireable whenever a brake is
needed because it makes a swivel caster totally immobile. The wheels featured
with Caster Model K3A are non-marking, and all except Polyolefin can be used on
hardwood floors. Polyolefin wheels are best at reducing the risk of a flat spot
occuring when loads are left standing for prolong periods. Gray Soft Rubber and
Polyurethane wheels have a sealed precision ball bearing. They provide floor
and cargo protection, quiet operation, and are very easy rolling. Try a set of
4 casters. You will be amazed at their performance! |
|
Model
SS-3A
UP to 300 lbs - 4" & 5" Wheels
Stainless Steel |
 |
| Click
here for More Information |
Capacity up to 300 pounds per caster. Stainless steel
casters are ideal for use in a wet or corrosive environment. These casters are
ideal for most light duty applications where a caster must be totally immobile
when the caster brake is applied. Caster Model 3A has a unique brake which
locks both the wheel and the swivel bearing simultaneously. This "Total-Lock"
brake insures that the swivel caster will not turn when the wheel is locked.
This combination wheel brake and swivel lock is essential for safety in some
applications - such as on worktables and medical equipment. The Total-Lock
brake is desireable whenever a brake is needed because it makes a swivel caster
totally immobile.
Features: * Swivel Construction - Stamped steel.
Swivel has double ball bearing. * Gray Non-marking Soft Rubber, Gray
Polyurethane, Black/Gray Polyurethane, Blue/Gray, Red/Gray and Polyurethane
Wheels have precision sealed ball bearings ( PS ) shielded by full thread
guards. Polyolefin do not have ball bearings in the wheel ( P ). All
Polyurethane Wheels have Delrin Bearings ( D ). |
|
| |
Model E
UP to 250 lbs - 4" thru 8" Wheels |
 |
| Click here for More Information |
This elegant caster is popular with designers because
of its European style characterized by smooth clean lines. Furniture designers
have chosen this caster with the 8" wheels and a threaded stem to be the four
legs of a contemporary glass coffee table. Precision sealed swivel and wheel
bearings guarantee this caster to be maintenance free. The strong nylon caster
frame ( body ) and non-marking gray soft rubber wheels make this caster ideal
for many medical, hospital, food service and institutional ( school )
applications.
Features: * Swivel Frame - made with extra thick nylon
for added strength and to maintain a sleek appearance. * Bearings - Precision
Sealed Ball Bearings in the swivel and the wheel for easy rotation and zero
maintenance. * Non-Marking Gray Soft Rubber tires provide quiet operation and a
cushion ride. * Available in a Plain Swivel - No Brake - No Lock, Swivel with a
Total Lock Brake and Swivel with a Directional Lock. * Resistant to most
chemicals and cart washable. * Operating Temperature: - Up to 159° F. |
|
|
|
|
|
|
|
