Skip to content
Our website is under redesign. If you have a problem locating anything please call us at - (800) 501-3808
Stem Caster – Caster Model 3
|
|
Capacity up to 300 pounds per caster.
These institutional stem casters are ideal for most types of institutional equipment, and are offered with a wide
selection of wheels.Features:
- Swivel Construction – Stamped steel. Swivel has double ball bearing with hardened raceways. Metal cover shields swivel bearings from dirt and dust.
- Axle – 3/8″ diameter bolt with lock nut.
- Wheel Bearing – PS= Precision Sealed Ball Bearings,
B= Ball Bearings, D= Delrin Bearings, P= Plain Bore,
RB= Roller Bearing
- Finish – external metal parts are Zinc plated.
|
Optional Features:
Wheel Brakes – Click Photos to Enlarge

TB
Pedal on side |

PTB
Pedal on Top |
PTB Brake not available with
5/8 & 3/4 Threaded Stems. |
Wheel Brakes are not designed
to hold on inclines. |
|
Typical Applications |
Material Handling – Bakery Equipment – Stocking Carts – Food Service Carts
Computer Equipment Stands & Mobile Workstations – Electronics & Diagnostic Equipment and Carts
Office Equipment – Computer Room Equipment – Laboratory Equipment – Institutional Equiment |
|
|
You should never select on the basis of load capacity alone. There is no industry standard for load capacity ratings and they may not include a factor for abuse. Our capacity ratings are below what the casters are capable of carrying because most applications have less than perfect conditions. Please refer to the information shown at the bottom of this page. If you have any doubt as to which wheel or caster is the BEST choice for your application contact us for a recommendation.
CALL US AT 800-501-3808 |
|
Available Stems | T-Nuts for Threaded Stems Click HERE
| Threaded Stems - TS22 for 1/2" - 13 x 1 1/2"
- TS5/8 for 5/8" - 11 x 1 3/4"
- TS3/4 for 3/4" - 10 x 1 3/4"
- TSC1 for 1/2" - 13 x 4"
- TSC2 for 5/8" - 11 x 4"
- TSC3 for 3/4" - 10 x 6"
| 
| |
1/2" Hole to mount with YOUR Bolt. Option HK1/2 will show in Options Box
| 
| | We do not provide the nuts to attach threaded stem casters. Threaded Stem Casters should NOT be used as a "Leveling Device"! The weight should be supported by the top of the swivel bearing of the caster, not somewhere above it on the threaded stem. | Partially Threaded Stem TS26N for 1/2" - 13 x 2 3/4"
| 
| | | Casters with 3/8" Threaded Stem or 7/16" Grip Ring Stem Click Here. | |
Caster Photos are with 5" Wheels - 3", 4" and 5" are available. |  Gray Soft Rubber Precision Sealed Ball Bearings (PS) TS22 Stem |  Gray Polyurethane Precision Sealed Ball Bearings (PS) EXR Stem |  Black/Gray Polyurethane Precision Sealed Ball Bearings (PS) HK1/2 Hole |  Blue/Gray Polyurethane Precision Sealed Ball Bearings (PS) EXR Stem |  Red/Gray Polyurethane Precision Sealed Ball Bearings (PS) TS22 Stem | 
High Capacity Rubber Ball Bearings (B) HK1/2 Hole | 
Blue Soft Rubber Roller Bearing (RB) Swivel Caster TS26N Stem |  Gray Rubber Crown Tread Precision Sealed Ball Bearings (PS) TS22 Stem | 
Blue Polyurethane on Aluminum Ball Bearings (B) HK1/2 Hole |  Gray Polyurethane Crown Tread Precision Sealed Ball Bearings (PS) TS26N Stem | 
All Polyurethane Delrin Bearing TS22 Stem | 
Black Hard Rubber Ball Bearings Wheel EXR Stem |  Polyolefin  ( Industrial Plastic ) Plain Bore ( No Bearings ) EXR Stem | 
Polyolefin - Donut  ( Industrial Plastic ) Ball Bearings HK1/2 Hole | 
Polyolefin - Donut  ( Industrial Plastic ) Ball Bearings EXR Stem | 
White Nylon Ball Bearings TS22 Stem | 
Nylon Ball Bearings HK1/2 Stem |  Phenolic Plain Bore ( No Bearings ) TS26N Stem | 
High Temperature Glass Filled Nylon TS22 Stem | 
High Temperature Phenolic/Fiberglass TS22 Stem | |
We do NOT include mounting Hardware. | Click on the Part Numbers for Pricing, Options and to ORDER. | |
|
Use the Polyolefin ( Industrial Plastic ) wheel for "Standing Loads". Polyolefin wheels eliminate the possiblilty of a flat spot developing if the castered equipment is left parked for a prolong period.
|
Threaded Stem Casters should NOT be used as a "Leveling Device"! Capacity ratings are based on the weight being directly on the top of the swivel bearing, not somewhere above it on the threaded stem.
You should never select on the basis of load capacity alone. Capacity ratings do not take into account the effort required to manually move a load. Capacity ratings are based on manual operation under ideal conditions. If these casters are going to be moved by mechanically powered equipment, consult us for a reduced capacity rating based on your application.
| |