Stainless Steel Caster – Caster Model 3 – Stem Caster
|Capacity up to 300 pounds per caster. |
Stainless steel stem casters are ideal for use in a wet or corrosive environment.
The caster brackets are made of stamped stainless steel. Swivels are standard with a seal and grease fitting.
Wheel Bearing: PS = Precision Sealed Ball Bearings, D= Delrin Bearings,
|We do not provide the nuts to attach threaded stem casters.|
Threaded Stem Casters should NOT be used as a "Leveling Device"!
The weight should be supported by the top of the swivel bearing of the caster, not somewhere above it on the threaded stem.
|We do NOT include mounting Hardware.|
|Click on the Part Numbers for Pricing, Options and to ORDER.|
Use the Polyolefin ( Industrial Plastic ) wheel for "Standing Loads". Polyolefin wheels eliminate the possiblilty of a flat spot developing on the surfiace of polyurethane and rubber tires when the weight exceeds 2/3 of the rated capacity when the object is left parked most of the time .
Threaded Stem Casters should NOT be used as a "Leveling Device"! Capacity ratings are based on the weight being directly on the top of the swivel bearing, not somewhere above it on the threaded stem.
You should never select on the basis of load capacity alone. Capacity ratings do not take into account the effort required to manually move a load. Capacity ratings are based on manual operation under ideal conditions. If these casters are going to be moved by mechanically powered equipment, consult us for a reduced capacity rating based on your application.