Stainless Steel Casters – Caster Model SS-9 – StemMount

Capacity up to 900 pounds per caster.

Stainless steel casters are ideal for use in a wet or corrosive environment. Typical applications include Pharmaceutical Laboratories and Food Processing Plants.

Features:

  • Swivel Construction: Cold Forged top plate and yoke base from 1/4″ stainless steel. Swivel has double ball bearing design.
  • Center Pin – 5/8″ diameter, bolt and nut.
  • Lube Axle – 1/2″ diameter hollow stainless bolt with Zerk fitting.
  • Wheel Bearing – D= Delrin Bearings are Standard. Stainless Steel Roller Bearings are Optional.
  • Grease Fittings – for swivel and wheel bearings.
We have an improved version of this caster at a
LOWER COST !!!

CLICK HERE TO SEE THE REPLACEMENT
You should never select on the basis of load capacity alone. There is no industry standard for load capacity ratings and they may not include a factor for abuse. Our capacity ratings are below what the casters are capable of carrying because most applications have less than perfect conditions. Please refer to the information shown at the bottom of this page. If you have any doubt as to which wheel or caster is the BEST choice for your application contact us for a recommendation.

CALL US AT 800-501-3808