Stainless Steel Caster – Caster Model 9 – PlateMount

Capacity up to 1200 pounds per caster.
Stainless steel casters are ideal for use in a wet or corrosive environment. Typical applications include Pharmaceutical Laboratories and Food Processing Plants.


  • Swivel Construction – cold forged top plate and yoke base from 1/4″ Stainless Steel.
  • Legs – 1/4″ thick, welded inside and out.
  • Axle – 1/2” diameter hollow bolt with lock nut.
  • Standard Wheel Bearing:
    D= Delrin Bearings, P= Plain Bore,
    SPS= Stainless Precision Sealed Ball Bearings,
    SSR= Stainless Steel Roller Bearing
  • Grease Fittings – for swivel and wheel bearings.
Mounting Plate – 4″ x 4 1/2″
This image is for Plate Size and Hole Placement ONLY. IT DOES NOT DEPICT THE ACTUAL PLATE.
We suggest that you do NOT drill the mounting holes to attach the casters until you receive them.
We do NOT include mounting Hardware.
All stainless steel is
NOT necessarily non-magnetic.

Click Here
You should never select on the basis of load capacity alone. There is no industry standard for load capacity ratings and they may not include a factor for abuse. Our capacity ratings are below what the casters are capable of carrying because most applications have less than perfect conditions. Please refer to the information shown at the bottom of this page. If you have any doubt as to which wheel or caster is the BEST choice for your application contact us for a recommendation.

CALL US AT 800-501-3808

Optional Features will be shown in the Shopping Cart:
Total Locking Brake
- TL - Locks both the Wheel from rolling AND the Swivel from turning. See increased Swivel Radius Dimensions Below.
Total Locking Brake - ON Total Locking Brake - OFF
Swivel Lock
- SL4 - Welded - Locks Swivel, NOT wheel.
Un-Locked Locked
Wheel Brake
- TB - Pedal on side of Wheel Locks ONLY the wheel from rolling.
Wheel Brakes are not designed to hold on inclines.
Raceway Seals
- RS - Seals Upper and Lower Raceways from dirt and debris, improves grease retention, can reduce noise and may prolong caster life.
Optional Wheel Bearings
PS - Non-Stainless Sealed Precision Ball Bearings
SPS - Stainless Sealed Precision Ball Bearings
SSR - Stainless Roller Bearing
For a Stainless caster with a Solid Stainless Steel Wheel - Click Here
Caster Photos are with 6" Wheels - 4" - 5" - 6"and 8" are available.

Gray Soft Rubber
Swivel Caster

All Polyurethane
Swivel Caster

Polyurethane on

Polyurethane on

Polyurethane on
Glass Filled Nylon
Swivel Caster

Swivel Caster

Extra Heavy Duty
Swivel Caster

White Nylon
Swivel Caster

Black Nylon
Swivel Caster

Swivel Caster

High Temperature
Glass - Nylon
Swivel Caster

High Temperature
Swivel Caster

Extra Heavy Duty
Rigid Caster

White Nylon
Rigid Caster

V Groove
Glass Filled Nylon
Rigid Caster
We do NOT include mounting Hardware.
Click on the Part Numbers for Pricing, Options and to ORDER.
If you have a LARGE quantity requirement, Please Email
Wheel Tread Material Std

Click Part Numbers Below
For Price and to Order


Swivel Caster Rigid Caster
Buy it Now Buy it Now
4" 2" Gray Soft Rubber, Flat D 250 SS-9RF4x2-S SS-9RF4x2-R 5 3 1/2"

6 1/2" with
TL Brake
See Below
5 5/8"
High Capacity Rubber D 300 SS-9RH4x2-S SS-9RH4x2-R
All Polyurethane Blue D 700 SS-9AP4x2-S SS-9AP4x2-R
Polyurethane - Blue/Black D 400 SS-9UP4x2-S SS-9UP4x2-R
Polyurethane - Maroon/Gray D 400 SS-9MG4x2-S SS-9MG4x2-R
Poly on Glass-Filled Nylon D 700 SS-9UG4x2-S SS-9UG4x2-R
Polyolefin ( Black ) D 500 SS-9PB4x2-S SS-9PB4x2-R
Polyolefin - High Capacity SPS 800 SS-9RK4x2PS-S SS-9RK4x2PS-R
Grey Polyurethane SPS 800 SS-9HU4x2PS-S SS-9HU4x2PS-R
Nylon ( White ) D 800 SS-9NY4x2-S SS-9NY4x2-R
Nylon ( Black ) SPS 800 SS-9MK4x2PS-S SS-9MK4x2PS-R
Phenolic D 800 SS-9TM4x2-S SS-9TM4x2-R
High Temp Glass Filled Nylon P 600 SS-9NP4x2-S SS-9NP4x2-R
High Temp Phenolic - Fiberglass SSR 600 SS-9TP4x2-S SS-9TP4x2-R
V-Groove Glass Filled Nylon SPS 500 SS-9VN4x2SPS-S SS-9VN4x2SPS-R
5" 2" Gray Soft Rubber, Flat D 300 SS-9RF5x2-S SS-9RF5x2-R 5 1/2 4 1/4"

6 1/2" with
TL Brake
See Below
6 1/2"
High Capacity Rubber D 350 SS-9RH5x2-S SS-9RH5x2-R
All Polyurethane Blue D 800 SS-9AP5x2-S SS-9AP5x2-R
Polyurethane - Blue/Black D 500 SS-9UP5x2-S SS-9UP5x2-R
Polyurethane - Maroon/Gray D 500 SS-9MG5x2-S SS-9MG5x2-R
Poly on Glass-Filled Nylon D 800 SS-9UG5x2-S SS-9UG5x2-R
Polyolefin ( Black ) D 600 SS-9PB5x2-S SS-9PB5x2-R
Polyolefin - High Capacity SPS 900 SS-9RK5x2PS-S SS-9RK5x2PS-R
Grey Polyurethane SPS 900 SS-9HU5x2PS-S SS-9HU5x2PS-R
Nylon ( White ) D 900 SS-9NY5x2-S SS-9NY5x2-R
Nylon ( Black ) SPS 900 SS-9MK5x2PS-S SS-9MK5x2PS-R
Phenolic D 800 SS-9TM5x2-S SS-9TM5x2-R
High Temp Glass Filled Nylon P 750 SS-9NP5x2-S SS-9NP5x2-R
High Temp Phenolic - Fiberglass SSR 750 SS-9TP5x2-S SS-9TP5x2-R
6" 2" Gray Soft Rubber, Flat D 400 SS-9RF6x2-S SS-9RF6x2-R 6 1/2 4 7/8"

6 1/2" with
TL Brake
See Below
7 1/2"
High Capacity Rubber D 450 SS-9RH6x2-S SS-9RH6x2-R
All Polyurethane Blue D 900 SS-9AP6x2-S SS-9AP6x2-R
Polyurethane - Blue/Black D 600 SS-9UP6x2-S SS-9UP6x2-R
Polyurethane - Maroon/Gray D 600 SS-9MG6x2-S SS-9MG6x2-R
Poly on Glass-Filled Nylon D 900 SS-9UG6x2-S SS-9UG6x2-R
Polyolefin ( Black ) D 700 SS-9PB6x2-S SS-9PB6x2-R
Polyolefin - High Capacity SPS 1200 SS-9RK6x2PS-S SS-9RK6x2PS-R
Grey Polyurethane SPS 1000 SS-9HU6x2PS-S SS-9HU6x2PS-R
Nylon ( White ) D 900 SS-9NY6x2-S SS-9NY6x2-R
Nylon ( Black ) SPS 900 SS-9MK6x2PS-S SS-9MK6x2PS-R
Phenolic D 1200 SS-9TM6x2-S SS-9TM6x2-R
High Temp Glass Filled Nylon P 900 SS-9NP6x2-S SS-9NP6x2-R
High Temp Phenolic - Fiberglass SSR 900 SS-9TP6x2-S SS-9TP6x2-R
8" 2" Gray Soft Rubber, Flat D 500 SS-9RF8x2-S SS-9RF8x2-R 8 6 1/4"

7 1/2" with
TL Brake
See Below
9 1/2"
High Capacity Rubber D 550 SS-9RH8x2-S SS-9RH8x2-R
All Polyurethane Blue D 900 SS-9AP8x2-S SS-9AP8x2-R
Polyurethane - Blue/Black D 700 SS-9UP8x2-S SS-9UP8x2-R
Polyurethane - Maroon/Gray D 700 SS-9MG8x2-S SS-9MG8x2-R
Poly on Glass-Filled Nylon D 900 SS-9UG8x2-S SS-9UG8x2-R
Polyolefin ( Black ) D 800 SS-9PB8x2-S SS-9PB8x2-R
Polyolefin - High Capacity SPS 1200 SS-9RK8x2PS-S SS-9RK8x2PS-R
Grey Polyurethane SPS 1200 SS-9HU8x2PS-S SS-9HU8x2PS-R
Nylon ( White ) D 900 SS-9NY8x2-S SS-9NY8x2-R
Nylon ( Black ) SPS 900 SS-9MK8x2PS-S SS-9MK8x2PS-R
Phenolic D 1200 SS-9TM8x2-S SS-9TM8x2-R
High Temp Glass Filled Nylon P 900 SS-9NP8x2-S SS-9NP8x2-R
High Temp Phenolic - Fiberglass SSR 900 SS-9TP8x2-S SS-9TP8x2-R

Deduct 1 lb. for weight of rigid caster.
Swivel Radius Information:
The Total Locking Option ( TL ) changes the Swivel Radius of the caster to the following;
4", 5" and 6" diameter wheels = 6 1/2" Swivel Radius
8" diameter wheel = 7 1/2" Swivel Radius

Maximum Capacity under ideal conditions.
If your application exceeds 40 minutes at the maximum temperature rating for these wheels contact us at 800-501-3808 for a recommendation.
You should never select on the basis of load capacity alone. Capacity ratings do not take into account the effort required to manually move a load. Capacity ratings are based on manual operation under ideal conditions. If these casters are going to be moved by mechanically powered equipment, consult us for a reduced capacity rating based on your application. If a human being has to move the weight, select the largest practical wheel diameter.

If a caster failure occurs it is almost always because of misuse or abuse. It has been very rare that a product failed because of faulty material or poor workmanship. The following are examples of things that we do NOT want you to do:

1. Dragging the wheel sideways.
2. Shock or Impact caused by dropping the load instead of setting it down on the castered equipment.
3. Improper Installation such as:
  A. Rigid casters not installed parallel to one another.
  B. Swivel casters not installed parallel to the floor.
  C. Using less than 4 bolts to attach the mounting plate.
  D. Distortion of the swivel bearing when attaching the mounting plate due to welding improperly.
4. Exceeding the rated capacity of the wheel or caster.
5. Exceeding a rolling speed of 3 MPH.
6. The build up of heat caused by continuous operation causing tire separation.