Industrial Caster – Caster Model G15 – Stem Mount

Capacity up to 1,500 pounds per caster only if infrequently moved in a manual application where there is no abuse.

Model 15 begins our industrial casters with precision machined swivel bearings. Benefits include easier swiveling, reduced swivel vibration, and longer trouble free performance.

Model G15 stem casters are recommended only for manually moved applications. Threaded Stem Casters should NOT be used as a “Leveling Device”! Capacity ratings are based on the weight being directly on the top of the swivel bearing, not somewhere above it on the threaded stem.

Features:

  • Swivel Construction – precision machined combination load and thrust bearing with heat treated raceway. No center pin.
  • Legs – 1/4″ thick, welded inside and out.
  • Axle – 1/2” diameter hollow bolt with lock nut.
  • Wheel Bearing – B= Ball Bearings, BRNZ= Bronze, D= Delrin Bearings, PS= Precision Sealed Ball Bearings, P= Plain Bore, R= Roller Bearing.
  • Grease Fittings – for swivel and wheel bearings.
  • Finish – external metal parts are zinc plated.
You should never select on the basis of load capacity alone. There is no industry standard for load capacity ratings and they may not include a factor for abuse. Our capacity ratings are below what the casters are capable of carrying because most applications have less than perfect conditions. Please refer to the information shown at the bottom of this page. If you have any doubt as to which wheel or caster is the BEST choice for your application contact us for a recommendation.

CALL US AT 800-501-3808

Need this caster with a PLATE mount? Click here.


Optional Features:
Wheel Brake
- TB - Pedal on side of Wheel Locks ONLY the wheel from rolling.
Wheel Brakes are not designed
to hold on inclines.
Wheel Brake - FCB - Face Contact Brake
Available Stems
We do not provide the nuts to attach threaded stem casters.
Threaded Stem Casters should NOT be used as a "Leveling Device"!
The weight should be supported by the top of the swivel bearing of the caster, not somewhere above it on the threaded stem.
Threaded Stems:
  • TST1: 3/4" - 10 x 2 1/2"
  • TSS7: 3/4" - 10 x 4 1/2"
  • TST2: 1" - 8 x 2 1/4"
  • TSC7: 1" - 8 x 4"
Plain Round Stems:
  • RDL2: 3/4" x 4"
  • RDL3: 7/8" x 4"
  • RDL4: 1" x 4"
  • RDL5: 1 3/8" x 4"
Caster Photos are with 6" Wheels - 4" - 5" - 6"and 8" are available.

Green
Polyurethane on Iron

Red
Polyurethane on Iron

Blue Slight Crown Tread
Polyurethane on Iron

95A Red Polyurethane
on Iron Crown Tread

Green Polyurethane on
Glass-Filled Nylon

Blue/Black
Polyurethane on Polyolefin

Maroon/Gray
Polyurethane on Polyolefin

65D Blue Polyurethane
on Aluminum Crown Tread

95A Green Polyurethane
on Aluminum Crown Tread

90A Orange Polyurethane
on Aluminum Crown Tread


60 D Blue All Polyurethane


65 D Gray All Polyurethane

Extra Soft 60 A Gray
Super Cushion Rubber

Gray Soft Rubber
Flat Tread

Gray Soft Rubber
Crown Tread

High Capacity Rubber
Flat Tread


Polyolefin

Extra Heavy
Duty Polyolefin


White Nylon


Phenolic
We do NOT include mounting Hardware.
Click on the Part Numbers for Pricing, Options and to ORDER.
Caster
Wheel
Diam.
Tread
Width
Click here
to compare
wheel materials.
Std
Brg
Type

Max
Cap.
Each
Caster
lbs.
Click Part Numbers Below
For Price and to Order

Approx
Swivel
Weight
Approx
Swivel
Radius
Overall
Height

Wheel Tread Material
Click to see Wheel
Swivel Caster
Buy it Now
4" 2" Gray Soft Rubber, Flat R 200 G15RF4X 6 3 1/8" 5 7/16"
Gray Soft Rubber, Crowned R 250 G15RD4X 6
High Capacity Rubber B 300 G15RH4X 6
Polyurethane on Iron - Green R 700 G15PY4X 7
Polyurethane on Iron - Red R 700 G15PYR4X 7
Polyurethane on Iron - Blue - Slight Crown R 700 G15PYC4X 7
95A Polyurethane on Iron - Red - Full Crown R 700 G15PCI4X 7
Polyurethane - Blue/Black R 400 G15UP4X 6
Polyurethane - Maroon/Gray R 400 G15MG4X 6
Polyurethane on Glass-Filled Nylon R 700 G15UG4X 6
All Polyurethane Blue R 700 G15AP4X 5 1/2
All Polyurethane Gray PS 800 G15HU4X 6
Polyolefin ( Black ) R 400 G15PB4X 5
Polyolefin - High Capacity PS 800 G15RK4X 6
Nylon ( White ) R 800 G15NY4X 6
Phenolic R 800 G15TM4X 6
5" 2" Gray Soft Rubber, Flat R 300 G15RF5X 9 3 3/4" 6 5/16"
Gray Soft Rubber, Crowned R 250 G15RD5X 9
High Capacity Rubber B 350 G15RH5X 9
Polyurethane on Iron - Green R 800 G15PY5X 11
Polyurethane on Iron - Red R 800 G15PYR5X 10
Polyurethane on Iron - Blue - Slight Crown R 800 G15PYC5X 10
95A Polyurethane on Iron - Red - Full Crown PS 800 G15PCI5X 10
90A Polyurethane on Aluminum - Orange - Full Crown PS 800 G15UAO5X 8
Polyurethane - Blue/Black R 500 G15UP5X 8 1/2
Polyurethane - Maroon/Gray R 500 G15MG5X 8 1/2
Polyurethane on Glass-Filled Nylon R 900 G15UG5X 8
All Polyurethane Blue R 800 G15AP5X 8
All Polyurethane Gray PS 900 G15HU5X 7
Polyolefin ( Black ) R 500 G15PB5X 7 1/2
Polyolefin - High Capacity PS 900 G15RK5X 8 1/2
Nylon ( White ) R 900 G15NY5X 8 1/2
Phenolic R 800 G15TM5X 8
6" 2" SUPER CUSHION Rubber B 350 G15CB6X 9 4 1/2" 7 5/16"
Gray Soft Rubber, Flat R 400 G15RF6X 8 1/2
Gray Soft Rubber, Crowned R 350 G15RD6X 8 1/2
High Capacity Rubber B 450 G15RH6X 8 1/2
Polyurethane on Iron - Green R 1000 G15PY6X 11
Polyurethane on Iron - Red R 1000 G15PYR6X 11
Polyurethane on Iron - Blue - Slight Crown PS 1200 G15PYC6X 11
95A Polyurethane on Iron - Red - Full Crown PS 900 G15PCI6X 11
95A Polyurethane on Aluminum - Green - Full Crown PS 900 G15UAC6X 8
90A Polyurethane on Aluminum - Orange - Full Crown PS 900 G15UAO6X 8
65D Polyurethane on Aluminum - Blue - Full Crown PS 1000 G15UDC6X 8
Polyurethane - Blue/Black R 600 G15UP6X 8 1/2
Polyurethane - Maroon/Gray R 600 G15MG6X 8 1/2
Polyurethane on Glass-Filled Nylon R 1000 G15UG6X 8
All Polyurethane Blue R 900 G15AP6X 8
All Polyurethane Gray PS 1200 G15HU6X 8
Polyolefin ( Black ) R 600 G15PB6X 7 1/2
Polyolefin - High Capacity PS 1200 G15RK6X 8 1/2
Nylon ( White ) R 1000 G15NY6X 8 1/2
Phenolic R 1200 G15TM6X 8 1/2
8" 2" SUPER CUSHION Rubber B 450 G15CB8X 11 6" 9 5/16"
Gray Soft Rubber, Flat R 500 G15RF8X 10
Gray Soft Rubber, Crowned R 450 G15RD8X 10
High Capacity Rubber B 550 G15RH8X 10
Polyurethane on Iron - Green R 1200 G15PY8X 14
Polyurethane on Iron - Red R 1200 G15PYR8X 14
Polyurethane on Iron - Blue - Slight Crown PS 1500 G15PYC8X 14
95 APolyurethane on Iron - Red - Full Crown PS 1000 G15PCI8X 14
95A Polyurethane on Aluminum - Green - Full Crown PS 1000 G15UAC8X 9
90A Polyurethane on Aluminum - Orange - Full Crown PS 1000 G15UAO8X 9
65D Polyurethane on Aluminum - Blue - Full Crown PS 1200 G15UDC8X 9
Polyurethane - Blue/Black R 700 G15UP8X 10
Polyurethane - Maroon/Gray R 700 G15MG8X 10
Polyurethane on Glass-Filled Nylon R 1200 G15UG8X 10
All Polyurethane Blue R 1000 G15AP8X 10
All Polyurethane Gray PS 1500 G15HU8X 10
Polyolefin ( Black ) R 700 G15PB8X 10
Polyolefin - High Capacity PS 1400 G15RK8X 11
Nylon ( White ) R 1100 G15NY8X 11
Phenolic R 1400 G15TM8X 9

Threaded Stem Casters should NOT be used as a "Leveling Device"! Capacity ratings are based on the weight being directly on the top of the swivel bearing, not somewhere above it on the threaded stem.

You should never select on the basis of load capacity alone. Capacity ratings do not take into account the effort required to manually move a load. Capacity ratings are based on manual operation under ideal conditions. If these casters are going to be moved by mechanically powered equipment, consult us for a reduced capacity rating based on your application. If a human being has to move the weight, select the largest practical wheel diameter.

If a caster failure occurs it is almost always because of misuse or abuse. It has been very rare that a product failed because of faulty material or poor workmanship. The following are examples of things that we do NOT want you to do:

1. Dragging the wheel sideways.
2. Shock or Impact caused by dropping the load instead of setting it down on the castered equipment.
3. Improper Installation such as:
  A. Rigid casters not installed parallel to one another.
  B. Swivel casters not installed parallel to the floor.
  C. Using less than 4 bolts to attach the mounting plate.
  D. Distortion of the swivel bearing when attaching the mounting plate due to welding improperly.
4. Exceeding the rated capacity of the wheel or caster.
5. Exceeding a rolling speed of 3 MPH.
6. The build up of heat caused by continuous operation causing tire separation.