Conventional Moldon Rubber Caster Wheels

These Conventional Moldon rubber caster wheels have soft rubber tires molded onto iron centers. Soft rubber provides more desirable operating characteristics than any other wheel material. It is quiet, absorbs shock (prolonging equipment life and protecting cargo), can roll over small objects, protects costly floor surfaces, and minimizes vibration. The Conventional Moldon rubber caster wheel falls short of perfection in its limitation under load – it does not roll easily. Load capacity ratings do not take into account the effort required to manually move a load (drawbar pull measured in pounds). If cargo is to be moved manually on Conventional Moldon rubber caster wheels, reduce capacity ratings by 50% and select the largest practical wheel diameter. These caster wheels should not be left standing under load for extended periods as the tires may take a permanent “set” or develop flat spots. They can be used on almost any dry factory floor. The bonding agent which holds the rubber tire to its iron center can be affected by exposure to some chemicals, impact, overloading, and the buildup of heat. Tire hardness is 65 to 75 Durometer, Shore A. Temperature range is -20° to 159° F.
In practice, employees will load equipment only to the capacity that they can move. For maximum productivity and return on your investment consider our easy rolling PREMIUM rubber caster wheels. Also consider our non marking Gray Rubber and Super Cushion Rubber Caster Wheels.IS THIS THE RIGHT WHEEL FOR YOUR APPLICATION?? CLICK TO COMPARE WITH OTHER WHEELS.

We do NOT include mounting Hardware.
Click on the Part Numbers for Pricing, Options and to ORDER.
WHEELS ONLY
Wheel
Diam.
Tread
Width

Hub
Length

Capacity
Lbs.
Click Part Numbers Below
For Price and to Order

Bearing
I.D.
I.D. with
Spanner.
Approx.
Wt.
Wheel ONLY
Part Number
4"2"2 7/16"250MR4x23/4"1/2"3
5"2"2 7/16"300MR5x23/4"1/2"4
6"2"2 7/16"400MR6x23/4"1/2"5
8"2"2 7/16"500MR8x23/4"1/2"7
2 1/2"2 3/4"670MR8x2.50N1"3/4"11
2 1/2"3 1/4"670MR8x2.501"3/4"11
3"3 1/4"840MR8x31"3/4"12
10"2 1/2"2 3/4"790MR10x2.50N1"3/4"13
2 1/2"3 1/4"790MR10x2.501"3/4"13
3"3 1/4"1000MR10x31"3/4"17
12"2 1/2"2 3/4"900MR12x2.50N1"3/4"18
2 1/2"3 1/4"900MR12x2.501"3/4"18
3 "3 1/4"1140MR12x31"3/4"23

Other bearing and wheel sizes are available on request.

You should never select on the basis of load capacity alone. Capacity ratings do not take into account the effort required to manually move a load (drawbar pull). Reduce capacity ratings by 50% if cargo is to be moved manually on these rubber tired wheels. Capacity ratings are based on manual operation under ideal conditions. If these wheels are going to be moved by mechanically powered equipment, consult us for a reduced capacity rating based on your application.