Phenolic Caster Wheels

 

Phenolic caster wheels are made from macerated canvas mixed with phenolic resin, and molded under high pressure and temperature. Its hardness is comparable to polished maple flooring. Phenolic caster wheels are recommended for smooth concrete and can be used for storage (standing) loads without permanent set. These caster wheels are highly resistant to oil, grease, gasoline and mild acids. It is not recommended for wet applications where the wheel will be in standing water. They are affected in various degrees by strong acids and some alkaline solutions. Temperature range is -40° to +250° F, with intermittent use up to 300° F. Phenolic caster wheels will carry loads as great as the same size iron wheel. The wheel material may chip or cut from contact with steel plate or from rolling over steel parts on the floor. The wheel tread may show wear from repeated travel over rough surfaces. Floor wear is slight except where floors are already starting to deteriorate. These wheels can be made with a laminated unmacerated tread to provide 25% more capacity and greater chip resistance.

R = Roller Bearing, D = Delrin Bearings, P = Plain Bore, PS = Precision Sealed Ball Bearings

IS THIS THE RIGHT WHEEL FOR YOUR APPLICATION?? CLICK TO COMPARE WITH OTHER WHEELS.

6" x 2"
Phenolic Wheel
Shown with
Roller Bearings
TM - "Recessed Sides"

6" x 2"
Phenolic Wheel
Shown with
Roller Bearings
TH - "Straight Sides"

6" x 3"
Phenolic Wheel
Shown with
Roller Bearings
TH - "Straight Sides"

8" x 3"
Phenolic Wheel
Shown with
Roller Bearings
TM - "Recessed Sides"

5" x 1 1/4"
Phenolic Wheel
Shown with
Plain Bore
TM - "Recessed Sides"

WHEELS ONLY
We do NOT include mounting Hardware.
Click on the Part Numbers for Pricing, Options and to ORDER.
Wheel
Diam.
Tread
Width

Hub
Length

Capacity
Lbs.
Click Part Numbers Below
For Price and to Order
Bearing
I.D. / Type
I.D. with
Spanner.
Approx.
Wt.
Wheel ONLY Part Number
3"1 1/4"1 3/8"300TM3x1.25P1/2" P3/8"3/4
3 1/4"2"2 7/16"700TH3.25x2R3/4" R1/2"1 1/2
4"1 1/4"1 3/8"300TM4x1.25P1/2" P3/8"1
1 1/2"1 5/8"400TM4x1.50P1 1/2
2"2 7/16"800TM4x2PS1/2" PSN/A1 3/4
TM4x2R3/4" R1/2"
TM4x2D3/4" D
1000TH4x2R3/4" R2
5"1 1/4"1 3/8"300TM5x1.25P1/2" P3/8"1 1/2
1 1/2"1 5/8"450TM5x1.50P1/2" P1 3/4
2"2 7/16"1000TM5x2PS1/2" PSN/A2 1/4
TM5x2R3/4" R1/2"
TM5x2D3/4" D
1200TH5x2R3/4" R2 1/2
6"2"2 7/16"1200TM6x2PS1/2" PSN/A2 3/4
TM6x2R3/4" R1/2"
TM6x2D3/4" D
1500TH6x2R3/4" R3
2 1/2"2 3/4"1600TH6x2.50N1" R3/4"4 1/4
3"3 1/4"2000TH6x3R1" R5 1/2
8"2" 2 7/16"1400TM8x2PS1/2" PSN/A4
TM8x2R3/4" R1/2"
TM8x2D3/4" D
2 1/2"2 3/4"1800TM8x2.50N1" R3/4"6
3"3 1/4"2500TM8x3R1" R7 1/2
10"2 1/2"2 3/4"1800TM10x2.50N1" R3/4"7 1/2
3"3 1/4"2500TM10x3R1" R10
12"2 1/2"2 3/4"1800TM12x2.50N1" R3/4"11 1/2
3"3 1/4"3000TM12x3R1" R13

"TM" indicates caster wheels with RECESSED SIDES.
"TH" indicates caster wheels with STRAIGHT SIDES.

You should never select on the basis of load capacity alone. Capacity ratings do not take into account the effort required to manually move a load. Capacity ratings are based on manual operation under ideal conditions. If these wheels are going to be moved by mechanically powered equipment, consult us for a reduced capacity rating based on your application