4″ All Polyurethane Wheel – Stainless Steel G-15

Description

4″ All Polyurethane Wheel. Stainless Precision Sealed Ball Bearings in the Wheel. Size shown in photo is 6 x 2. Choose Stem Above. The Stainless steel stem caster G15 offers our highest load capacity for a stem caster with either a ¾” or 1” diameter threaded stainless steel stem. It’s precision machined swivel bearing contains a combination load and thrust bearing which enables easier swiveling and reduced swivel vibration. This stainless steel caster uses 2” wide wheels that come with a variety of bearing choices to suit your application. This stainless steel stem caster is a kingpinless design, meaning there is no integral center pin that can fail. This stainless steel swivel caster is intended for manually operated applications only, please consult with us if powered equipment is to be used. This stainless steel stem caster is not intended to be used as a leveling device, doing so will cause it to fail prematurely. This stainless steel caster is not intended to hold more than 6000lbs of weight per each swivel caster, if your application exceeds this capacity per caster please contact us for better choices.

This solid all polyurethane industrial caster wheel was developed for sanitary and washdown applications, and is capable of rolling indoors or outdoors. The blue all polyurethane (“AP”) caster wheel is manufactured in 2” wide; with diameters ranging from 4”-8”. Caster City manufactures this (“AP”) blue all polyurethane wheel to come with a roller bearing, delrin bearings, or a sealed precision ball bearing and all bearing options are available in stainless steel as well.

These wheels are non marking and non conductive. The absence of a metal center eliminates bond failure as a cause for wheel replacement. These caster wheels are especially suited for use with stainless steel casters in wet and corrosive applications. They are designed for use in Pharmaceutical Laboratories, Hospitals, and Food Processing Plants – wherever a clean sanitary design is desired. These wheels are not recommended for applications involving shock, overloading, abuse, obstructions, poor floors, or for storage (standing) loads. Hardness is 60 – 65 Durometer Shore D. Temperature range is -20° to 180° F.

These wheels are designed for use in a wet environment and they eliminate the possibility of tire separation.

If a static load on this tire exceeds 60% of the rated capacity and is left unmoved for a prolonged period of time, the tire may develop a flat spot. Durometer : Shore D 60.