5″ All Polyurethane – Stainless Steel G-15

Description

5″ All Polyurethane Wheel. Stainless Precision Sealed Ball Bearings in the Wheel. Size shown in photo is 6 x 2. Choose Stem Above. This stainless steel stem G15 caster comes with either ¾” or 1” diameter stems which offer our highest load rating for a stem caster. It’s precision machined swivel bearing contains a combination load and thrust bearing which enables easier swiveling and reduced swivel vibration. This caster uses the same 2” wide wheels as Stainless Steel Model 9, offering a wide range of wheel material and bearings. This stainless steel stem caster is a kingpinless design, meaning there is no integral center pin that can fail. Stainless steel stem caster G15 uses a ½” diameter axle bolt with grease fitting, and it’s rated capacity is up to 1500lbs per caster. This stainless steel stem caster is not intended to be used as a leveling device, doing so will cause it to fail prematurely. If your stainless steel application calls for more than 6000lbs of total weight on four casters, please consult with us for a recommendation.

This solid all polyurethane industrial caster wheel was developed for sanitary and washdown applications, and is capable of rolling indoors or outdoors. The blue all polyurethane (“AP”) caster wheel is manufactured in 2” wide; with diameters ranging from 4”-8”. Caster City manufactures this (“AP”) blue all polyurethane wheel to come with a roller bearing, delrin bearings, or a sealed precision ball bearing and all bearing options are available in stainless steel as well.

These wheels are non marking and non conductive. The absence of a metal center eliminates bond failure as a cause for wheel replacement. These caster wheels are especially suited for use with stainless steel casters in wet and corrosive applications. They are designed for use in Pharmaceutical Laboratories, Hospitals, and Food Processing Plants – wherever a clean sanitary design is desired. These wheels are not recommended for applications involving shock, overloading, abuse, obstructions, poor floors, or for storage (standing) loads. Hardness is 60 – 65 Durometer Shore D. Temperature range is -20° to 180° F.

These wheels are designed for use in a wet environment and they eliminate the possibility of tire separation.

If a static load on this tire exceeds 60% of the rated capacity and is left unmoved for a prolonged period of time, the tire may develop a flat spot. Durometer : Shore D 60.