5″ Polyolefin Wheel – Stem Model 3

Description

Stem Caster Model 3 is made from stamped steel frames with a zinc plating to resist corrosion.  The swivel bearing of Stem Caster Model 3 is defined by two rows of ball bearings rotating on hardened raceways.  This stem caster uses an axle bolt with a diameter of 3/8”, and this stem caster has it’s swivel bearing held together by a 1/2” rivet.  There is a metal dust cover over the swivel bearings protecting the raceways.  If you are going to put more than 1,000 lbs of weight on four stem casters of this size, please consult with us.

5″ Polyolefin Wheel.  Sealed Ball Bearing Wheel.  Shown in photo with 5″ wheels.

Polyolefin Caster Wheels are injection molded from a blend of thermoplastic polymers forming a one piece solid sanitary design. These Polyolefin wheels are especially suited for wet and corrosive applications. They are very resistant to most commonly encountered liquids. Polyolefin wheels have a lower capacity and a more limited temperature range than Nylon wheels. In a cold dry environment, such as a refrigerated store room, Polyolefin wheels may become brittle. They should not be used in a freezer or a heat application above 180°F intermittent usage, such as a rack washer.

This donut shaped wheel comes with sealed ball bearings in the wheel. It’s tread shape enables it to change directions much more easily.

*video shown is with the 5″ Wheel* For more information and help placing an order, give us a call at 800-501-3808.

For more information and help placing an order, give us a call at 800-501-3808.