5″ X 1 1/2″ High Temperature Glass Filled Nylon – Plate Swivel Caster 3

Description

Plate Caster Model 3 is made using a stamped steel construction and is bright zinc plated for corrosion resistance.  The mounting plate is 2 3/8” x 3 5/8” and the hole pattern is slotted to: 1 3/4” x 2 7/8” – 3” and is designed to use a mounting bolt size of 5/16”.  This plate caster uses a ⅜” diameter axle and the swivel caster is held together by a 1⁄2” diameter rivet.  This institutional plate caster is constructed with two ball bearings on hardened raceways to ensure life of the caster.  There is a metal dust cap protecting the swivel raceways to shield them from dirt and dust.  Features wheels with 1-¼” and 1-1⁄2” tread widths.  This Zinc Plated caster is NSF listed.

Caster City manufactures this plate caster in Stainless Steel Caster Model 3.  This caster comes standard with two high temperature white seals in the swivel bearing that has a temperature range of -20F to 450F.  Also come with a grease fitting on the dust cover and axle, and buffed to a smooth reflective surface.

Caster City also manufactures this plate caster in Economy Stainless Steel Plate Caster Model K3.  Constructed with S304 stainless steel and comes with no dust cap or grease fitting on the swivel making it economically efficient for most applications.

High Temperature Wheels with a prefix “NP” in the part number are made of nylon mixed with glass fiber. They perform best in moist heat applications such as in smokehouses, moist heat bakery and autoclave applications and around water and steam such a pressurized steam-autoclave. Temperature Rating: Up to 425° F for 30 minutes MAXIMUM continuous operation. Then allow to cool to room temperature. If used above 425° for more than 30 minutes continuous operation it will reduce the life of the wheel. High Temperature Glass-Filled Nylon wheels are not recommended for dry heat applications because once the moisture content of the wheel gets to zero, the wheel will shatter.