6″ Phenolic Wheel – Model 50 Rigid Caster

Description

Model 50 Rigids and the matching swivel casters have the same wheels displayed on Plate Model 30. The weight capacity ratings in Model 50 are usually greater for the exact wheels shown in Model 30. The heavier and bigger mounting plate on Model 50, larger swivel bearing, and heavier legs are the reasons for the greater load capacity ratings shown on rigid model 50. Rigids are mostly used to control the direction when moving equipment in a direct line. The one exception are rigid plate casters which have v-groove wheels. V-groove wheels rotate on an inverted angle iron track which controls the line of travel. When swivel and rigid casters are on the same piece of machinery, swivel casters should be connected below the push handle, and rigid casters should be attached to the opposite end of where the push handle is placed. Rigid casters can not move sideways. They require equipment to be maneuvered into place. Our recommendation is you use 4 swivel casters when maximum mobility is required in a confined work environment.

Phenolic caster wheels are a hard composition, non-marking wheel that is excellent for large loads that do not move often. This caster wheel can handle the impacts of small obstructions and shock loads, as well as being unable to develop flat spots if left immobile with a high static load. Phenolic can absorb water and other chemicals if excessive exposure occurs. Phenolic caster wheels come standard with a roller bearing and have precision sealed ball bearings as an option. Phenolic wheels begin with 3” in diameter and are available for diameters up to 18”. All phenolic wheels have a Durometer of Shore D 90 and the temperature range is -40° to +250° F. Contact us if you need help with placing an order: 800-501-3808

*This Plate Caster Model 50 contains the Phenolic Wheel. The caster shown in photo with 6″ x 3″ wheel.