bottom of the mounting bracket must be flush with the bottom of the door."
Notice: The swivel radius is 3". The distance from where the bracket gets
attached to the door to the center of the stem is only 2-3/8". The swivel can
NOT rotate 360 degrees. The wheel will come in contact with the door. The
mounting bracket must be flush with the bottom of the door in order for the
wheel NOT to hit the door.
||3" Door Caster
- Ideal for use on Light
- 3" Non-Marking Gray Rubber
- 125 lb. capacity per
- 100 lb. compression
- Spring offsets for uneven
- Caster frame is zinc
plated for rust resistance.
- Vertical mounting plate
size is 2" x 5 1/2"
with 4 holes spaced 15/16" x 3" on center
For lighter duty version - click
and to Order, Click the Part Number Below