V Groove Caster Wheels

V-groove caster wheels are designed to guide equipment by rolling on inverted angle iron track. Elevated track minimizes problems caused by floor debris. The relief groove at the base of the “V” equalizes the load on each face of the angle. Forged Steel V-groove caster wheels minimize wear of the V-groove sides and are best for frequent operation. When not operating on track, the considerable wheel tread on each side of the V-groove allows for use on smooth floors. It is important that if more than one track is used they are parallel, straight and level. Otherwise V-groove wheels may bind or run up over the track. Tolerance should be within plus or minus 1/64″ every 20 feet. Joints between pieces of track should be smooth and well reinforced. V-groove caster wheels are standard with straight roller bearings, which allow only 1/16″ total end play (side to side movement). It is desirable when loads are great to use tapered bearings, which have thrust as well as radial capacity. The proper adjustment of tapered bearings prohibits end play.

Compression must be applied to properly seat tapered bearings. This is achieved by tightening down against a bearing spacer on each side of the wheel to a maximum looseness of .010. Since tapered bearings prohibit end play, their use requires parallel track. Unless the layout is nearly perfect, it is best to use a single angle iron track for V-groove caster wheels parallel to an elevated flat bed for wheels without a V-groove.

Solid Stainless wheels are standard with Stainless Roller Bearings and Spanner Bushings.

V-Groove Gray Iron Wheels perform well only if they are not exposed to any kind of abuse. Abuse includes things like shock loads, impact, poor floors or floor obstructions, overload, and use with mechanically powered equipment. We recommend only Ductile, Forged, or Machined Steel wheels for applications which may involve any kind of abuse. Call us first for a written recommendation before selecting any V-Groove Gray Iron wheel.



8" x 4" Forged Steel
V-Groove Wheel

6" x 3" Ductile Steel
V-Groove Wheel

6" x 3" Ductile Steel
V-Groove Wheel

6" x 2" Machined Steel
V-Groove Wheel


6" x 2" Gray Iron
V-Groove Wheel

4" x 2" Solid
All Stainless Steel
V-Groove Wheel

4" x 2" Solid
Glass Filled Nylon
V-Groove Wheel
 
We do NOT include mounting Hardware.
Click on the Part Numbers for Pricing, Options and to ORDER.
WHEELS ONLY
Wheel
Diam.
Tread
Width
Wheel
Material

Hub
Length
Width
of
Groove
Depth
of
Groove

Max
Cap.
Lbs.
Click Part Numbers Below
For Price and to Order
Bearing
I.D. / Type
I.D.
with
Spanner
Approx.
Wt.
Wheel ONLY Part Number
4"2"Gray Iron2 7/16"7/8"7/16"500VL4x23/4" Roller1/2"3 3/4
Ductile Steel2 7/16"7/8"7/16"1500VS4x25
All Stainless2"7/8"7/16"1500SSVG4x210
Machined Steel2"7/8"7/16"2000VMS4x2PS1/2" P. BallN/A5
Glass Filled Nylon2 1/2"7/8"7/16"500VN4x2PS1/2" P. BallN/A1 1/2
6"2"Gray Iron2 7/16"7/8"7/16"500VL6x23/4" Roller1/2"6
Ductile Steel2 7/16"7/8"7/16"1500VS6x28
All Stainless2"7/8"7/16"1500SSVG6x221
Machined Steel2"7/8"7/16"3000VMS6x2PS1/2" P. Ball1/2"11
2 1/2"Ductile Steel2 3/4"7/8"7/16"3500VS6x2.50N1" Roller3/4"11
3"Gray Iron3 1/4"7/8"7/16"1000VL6x31" Roller3/4"12
Ductile Steel3 1/4"7/8"7/16"5000VS6x315
Ductile Steel3 1/2"7/8"7/16"7000VS6x3T.75T3/4" TaperedN/A15
Ductile Steel3 1/2"1 3/8"11/16"7000VS6x3W.75T15
Ductile Steel3 1/2"7/8"7/16"8000VS6x3T-1T1" Tapered15
Ductile Steel3 1/2"1 3/8"11/16"8000VS6x3W-1T15
8"3"Ductile Steel3 1/4"7/8"7/16"5000VS8x31" Roller3/4"21
4"Forged Steel4 1/2"1 3/4"11/16"15,000VF8x4-1.25T1 1/4" TaperedN/A37
Typical Installation Dimensions
Angle Iron
Thickness
Groove Width
1 3/4"1 3/8"7/8"
ABC
3/8"23/32"29/32"1 5/32"
1/4"21/32"27/32"1 3/32"
D - Plate Thickness = 1/2"
Angle Iron
Thickness
Groove Width
1 3/4"1 3/8"7/8"
A  BC
3/8"3/8"9/16"13/16"
1/4"5/16"1/2"3/4"
1/8"1/4"7/16"11/16"
D - Plate Thickness = 3/8"
Not Recommended

"VL" indicate Gray Iron V-Groove Caster Wheels.
"VF" indicate Forged Steel V-Groove Caster Wheels.
"VS" indicates Ductile Steel V-Groove Caster Wheels.
"APV" indicates All Polyurethane V-Groove Caster Wheels.
"SSVG" indicates All Stainless Steel V-Groove Caster Wheels.

You should never select on the basis of load capacity alone. Capacity ratings do not take into account the effort required to manually move a load. Capacity ratings are based on manual operation under ideal conditions. If these wheels are going to be moved by mechanically powered equipment, consult us for a reduced capacity rating based on your application.