Total Locking Stainless Caster Model 3A
Caster City ships all casters from Texas, Ohio, or Washington.
Capacity up to 300 pounds per caster. Stainless steel casters are ideal for use in a wet or corrosive environment.These casters are ideal for most light duty applications where a caster must be totally immobile when the caster brake is applied.
Mounting Plate – 2 3/8″ x 3 5/8″
Click Links Below for 2D Drawing of Caster Model 3:
Total Locking Brake:
Combination Wheel Brake and Swivel Lock – This brake simultaneously locks the wheel and the swivel. One step on the activating pedal instantly locks the entire caster holding the equipment firmly in place. One step on the release pedal frees the swivel and wheel.
Swivel Radius for Casters with the Total-Lock Brake – 4 3/8″
Total Locking Stainless Caster Model 3A Features:
- Plate Mount - Stainless Steel
- 304 Stainless Steel
- Swivel Construction - Stamped steel. Swivel has double ball bearing.
- Gray Non-marking Soft Rubber, Gray Polyurethane, Black/Gray , Blue/Gray and Red/Gray Polyurethane all have a precision sealed ball bearing ( PS ) shielded by full thread guards. Polyurethane on Aluminum Wheels have Ball Bearings ( B ) without thread guards. Polyolefin wheels have a plain bore ( no bearing ) ( P ).
- These rubber & polyurethane wheels are NOT for use in a rack washer.
- We have a special polyurethane wheel for use on racks or carts that are cleaned in a rack washer. Please call.
We suggest that you do NOT drill the mounting holes to attach the casters until you receive them.
Total Locking Stainless Caster Model 3A Chart (Click the Part Number to Order)
Desktop: When you put your mouse over the words in the wheel description column you see a picture of the wheel. Click on the part number in the Swivel and Rigid columns to see the complete caster.
Mobile: Hold down your finger on the chart and scroll to the right to click on the part number you would like to order.
We do NOT include mounting Hardware.
Total Locking Stainless Caster Model 3A with Wheels
Swivel Radius for Casters with the Total-Lock Brake – 4 3/8″
Use the Polyolefin ( Industrial Plastic ) wheel for “Standing Loads”. Polyolefin wheels eliminate the possiblilty of a flat spot developing if the castered equipment is left parked for a prolong period.
“You should never select on the basis of load capacity alone. There is no industry standard for load capacity ratings and they may not include a factor for abuse. Our capacity ratings are below what the casters are capable of carrying because most applications have less than perfect conditions. Please refer to the information shown at the bottom of this page. If you have any doubt as to which wheel or caster is the BEST choice for your application contact us for a recommendation.”
