Capacity up to 300 pounds per caster. These institutional stem casters are ideal for most types of institutional equipment, and are offered with a wide selection of wheels.

Caster City manufactures this stainless steel caster to come standard with a grease fitting in the swivel bearing, seals for the swivel bearing, and a dust cover to protect the swivel bearing.

To see Full List of Modular Stems available click here.

Use the Polyolefin ( Industrial Plastic ) wheel for “Standing Loads”. Polyolefin wheels eliminate the possiblilty of a flat spot developing on the surfiace of polyurethane and rubber tires when the weight exceeds 2/3 of the rated capacity when the object is left parked most of the time.

Threaded Stem Casters should NOT be used as a “Leveling Device”! Capacity ratings are based on the weight being directly on the top of the swivel bearing, not somewhere above it on the threaded stem.

Capacity up to 300 pounds per caster. These institutional casters are ideal for any light duty application where the caster must be totally immobile when the caster brake is applied. Caster Model 3A has a unique brake which locks both the wheel and the swivel bearing at the same time. This “Total-Lock” brake insures that the swivel caster will not turn when the wheel is locked. This combination wheel brake and swivel lock is essential for safety in some applications – such as on worktables, tablesaws, and medical equipment. The Total-Lock brake is desireable whenever a brake is needed because it makes a swivel caster totally immobile.