Door & Ladder Casters
Door Caster
You should never select on the basis of load capacity alone. Capacity ratings do not take into account the effort required to manually move a load. Capacity ratings are based on manual operation under ideal conditions. If these wheels are going to be moved by mechanically powered equipment, consult us for a reduced capacity rating based on your application.
The bottom of the mounting bracket must be flush with the bottom of the door.” Notice: The swivel radius is 3″. The distance from where the bracket gets attached to the door to the center of the stem is only 2-3/8″. The swivel can NOT rotate 360 degrees. The wheel will come in contact with the door. The mounting bracket must be flush with the bottom of the door in order for the wheel NOT to hit the door.
3″ Door Caster Features
- Ideal for use on Light Weight Doors.
- 3″ Non-Marking Gray Rubber Wheel.
- 125 lb. capacity per caster.
- 100 lb. compression spring.
- Spring offsets for uneven floors.
- Caster frame is zinc plated for rust resistance.
- Vertical mounting plate size is 2″ x 5 1/2″ with 4 holes spaced 15/16″ x 3″ on center for 5/16″ mounting hardware.
-
Add to cartQuick View
3″ Ladder Caster Features
- Ideal for use on Ladders and Light Weight Doors.
- 25 lb. compression spring.
- Spring offsets for uneven floors.
- Caster frame is zinc plated for rust resistance.
- Vertical mounting plate size is 3 11/16″ x 1″ with holes for 5/16″ mounting hardware.
-
Add to cartQuick View
