Chat with us, powered by LiveChat

Light Duty Model L2

Light Duty Caster Model L2

Capacity up to 150 pounds per caster. These casters have a low initial cost. They were designed for intermittent usage ( light duty ) on manually moved equipment, rolling on smooth floors, in applications where there is no abuse. The swivel has a double ball bearing. The gray soft non-marking rubber wheels provide floor protection and quiet operation. The polyolefin wheels are best when loads are to be left parked for prolonged periods. You may want to consider our caster Model 3. It represents a better return on your investment because it provides higher capacity, easier rolling, longer caster life and a wider selection of wheels.

“You should never select on the basis of load capacity alone. There is no industry standard for load capacity ratings and they may not include a factor for abuse. Our capacity ratings are below what the casters are capable of carrying because most applications have less than perfect conditions. Please refer to the information shown at the bottom of this page. If you have any doubt as to which wheel or caster is the BEST choice for your application contact us for a recommendation.”

Mounting Plate – 2 1/2″ x 3 5/8″

This image is for Plate Size and Hole Placement ONLY. IT DOES NOT DEPICT THE ACTUAL PLATE.
Light Duty Model L2, Caster City

We suggest that you do NOT drill the mounting holes to attach the casters until you receive them.

Types of Wheels for the Light Duty Caster Model L2:

We do NOT include mounting Hardware.

Caster Chart

Industrial & Heavy Duty Casters | Caster City