These hard to find sockets are now available for purchase separately. Sockets may be returned for exchange only, please measure carefully. Sockets shown below fit our casters. They may or may not fit other casters.

The most important thing is to make sure that the stem of the caster will FIT your chair.  Click Here for help on measuring your stem correctly. 

Industries that utilize Caster Sockets:

• Chair and Furniture Casters for Carpet Applications
• 3/8″ & 5/16″ Threaded Stem / 5/16″ Grip Neck Stem / Plate Mount Casters for Hardwood Floors
• 7/16″ Grip Ring Stem Casters for Hardwood Floors
• Work From Home Chair Casters
• Executive Chair Casters
• Doctor & Dental Chair Casters
• Gaming Chairs Casters

The length of your stem may be shorter but not longer.

Commonly called a “Caster Clip”, this socket is designed to install casters on the edge of 3/4″ Particle Board, MDF or similar sheet goods. Attach caster by drilling a 3/8″ x 1 5/8″ hole. Install socket, then insert caster. You may want to “drill & tack nail” the bottom face or add some silicon sealer to the hole when installing.

Attach caster by drilling a 3/8″ x 1 5/8″ hole. Install socket, then insert caster.

Grip Ring Stem: 7/16″ x 7/8″

The length of your stem my be shorter but not longer.

This socket is used to install casters with a 7/16″ Diameter Grip Ring Stem on WOOD or Steel furniture. The Tack Plate Diameter is approx 1″ and the overall length is 1.46″

To attach in wood, drill a 5/8″ x 1 1/2″ hole. Apply Epoxy Glue** ( Not supplied ) to socket and insert into hole. Allow to harden before inserting caster into socket. ( This socket is not plated and can also be welded to steel.

This socket is used to install casters with a 7/16″ Diameter Grip Ring Stem on WOOD furniture. Attach to inside of frame with wood screws ( Not supplied ). Insert caster into socket.

This socket is used to install casters with a 7/16″ Diameter Grip Ring Stem on WOOD furniture. Attach to inside of frame with wood screws ( Not supplied ). Insert caster into socket.

This socket is used to install casters with a 7/16″ Diameter Grip Ring Stem on WOOD furniture. To attach, drill a 5/8″ x 1 1/2″ hole. Insert socket and attach with 1/4″ wood screws ( Not supplied ). Insert caster into socket.