Dual Wheel Casters with DW Polyurethane Wheels Models 2-30, 2-50, & 2-100

Dual Wheel Casters with DW Polyurethane Wheels Model 2-30, 2-50, & 2-100

Dual Wheel casters provide a high load capacity with a minimum overall height. The larger footprint ( two wheels instead of one ) enhances stability and spreads the load over a larger floor area. The differential action inherent in all swivel dual wheel casters minimizes the effort required to change directions. We offer the finest quality polyurethane tires on the wheels in these casters.

There are two different colors. Each color represents a different tire hardness. Too often the purchase of wheels and casters is based on criteria far removed from the essential purpose – “Will they move the load smoothly and easily?” A piece of equipment purchased to carry and move a 2,000 lb. load is costly when it is loaded with only 1,000 lbs. in order to roll. Most people will load equipment only to a weight they can move easily and without injury. Equipment that requires two men to move it, when one should suffice, is also an expensive unit, regardless of acquisition cost.

With an easier rolling wheel and easier turning swivel, employees tire less, there are fewer accidents and productivity increases. Our Staff can give you valuable assistance in the selection of the right combination of wheels and casters for your needs. They are knowledgeable, competent and experienced in caster usage.

Dual Wheel Caster Features:

Lead time is 2 days for swivel and rigid casters without options | Lead time is 7 to 10 days for swivel casters with a face contact wheel brake or a swivel lock

“You should never select on the basis of load capacity alone. There is no industry standard for load capacity ratings and they may not include a factor for abuse. Our capacity ratings are below what the casters are capable of carrying because most applications have less than perfect conditions. Please refer to the information shown at the bottom of this page. If you have any doubt as to which wheel or caster is the BEST choice for your application contact us for a recommendation. CALL US AT 800-501-3808”

Optional Features:

Swivel Lock (SL4):

Welded – Locks Swivel converting it into a Rigid Caster.

(Unlocked)

(Locked)

Wheel Brake (FCB): Face Contact Brake locks both wheels. Wheel Brakes are not designed to hold on inclines.

Model 2-30 Plate Size

We suggest that you do NOT drill the mounting holes to attach the casters until you receive them. We do NOT include mounting Hardware.

Model 2-50 Plate Size

We suggest that you do NOT drill the mounting holes to attach the casters until you receive them. We do NOT include mounting Hardware.

Model 2-100 Plate Size

We suggest that you do NOT drill the mounting holes to attach the casters until you receive them. We do NOT include mounting Hardware.

You should never select on the basis of load capacity alone. Capacity ratings do not take into account the effort required to manually move a load. Capacity ratings are based on manual operation under ideal conditions. If these casters are going to be moved by mechanically powered equipment, consult us for a reduced capacity rating based on your application. If a human being has to move the weight, select the largest practical wheel diameter. If a caster failure occurs it is almost always because of misuse or abuse. It has been very rare that a product failed because of faulty material or poor workmanship. The following are examples of things that we do NOT want you to do:

1. Dragging the wheel sideways.
2. Shock or Impact caused by dropping the load instead of setting it down on the castered equipment.
3. Improper Installation such as:
A. Rigid casters not installed parallel to one another.
B. Swivel casters not installed parallel to the floor.
C. Using less than 4 bolts to attach the mounting plate.
D. Distortion of the swivel bearing when attaching the mounting plate due to welding improperly.
4. Exceeding the rated capacity of the wheel or caster.
5. Exceeding a rolling speed of 3 MPH.
6. The build up of heat caused by continuous operation causing tire separation.

Caster Chart

We do NOT include mounting Hardware.

Click on the Part Numbers for Pricing, Options and to ORDER.

If you have a LARGE quantity requirement, please Email Sales@CasterCity.com

CASTER WHEEL DIAM.Tread
Width
Each
Wheel
Wheel Tread Material
Hardness / Color
Caster
Model
MAX CAP. EACH CASTER LBS.SWIVEL CASTERRIGID CASTERAPPROX SWIVEL WEIGHT (LBS)APPROX SWIVEL RADIUSOVERALL HEIGHT
6″3″Polyurethane on Ductile Steel
90-95A / Blue
2-3020002-30DW6x3BL-S2-30DW6x3BL-R214 5/16″7 1/2″
Polyurethane on Ductile Steel
60D / Gray
2-3024002-30DW6x3GR-S2-30DW6x3GR-R21
Polyurethane on Ductile Steel
90-95A / Blue
2-5020002-50DW6x3BL-S2-50DW6x3BL-R224 3/4″8″
Polyurethane on Ductile Steel
60D / Gray
2-5024002-50DW6x3GR-S2-50DW6x3GR-R22
8″3″Polyurethane on Ductile Steel
90-95A / Blue
2-3025002-30DW8x3BL-S2-30DW8x3BL-R306 3/8″10 1/8
Polyurethane on Ductile Steel
60D / Gray
2-3030002-30DW8x3GR-S2-30DW8x3GR-R30
Polyurethane on Ductile Steel
90-95A / Blue
2-5025002-50DW8x3BL-S2-50DW8x3BL-R306 1/2″10 1/2″
Polyurethane on Ductile Steel
60D / Gray
2-5030002-50DW8x3GR-S2-50DW8x3GR-R30
4″Polyurethane on Ductile Steel
90-95A / Blue
2-10035002-100DW8x4BL-S2-100DW8x4BL-R486 3/16″10 1/2″
Polyurethane on Ductile Steel
60D / Gray
2-10040002-100DW8x4GR-S2-100DW8x4GR-R48
10″3″Polyurethane on Ductile Steel
60D / Gray
2-5035002-50DW10x3GR-S2-50DW10x3GR-R488 1/3212 1/2″
Polyurethane on Ductile Steel
60D / Gray
2-10035002-100DW10x3GR-S2-100DW10x3GR-R487 11/16″15 1/2″
Image of a Caster | Caster City |, Caster Wheels, Chair Casters, Chair Wheels | Furniture Wheels
has been added to your cart:
Checkout