img

Lead Time is Everything!!
Call Your Order In For
Expedited Service: 800-501-3808

close

Foam Filled Pneumatic Casters

Mounting Plate (4″ x 4 1/2″)

This image is for Plate Size and Hole Placement ONLY. IT DOES NOT DEPICT THE ACTUAL PLATE.

 

These industrial casters are designed for low speed manually moved applications only. Foam Filled Pneumatic Wheels have NO air in the tires, thus eliminating the possibility of the wheels ever going flat.

Foam Filled wheels do NOT have any resilience. They provide the same traction and wide footprint of air filled wheels which enables them to roll on grass, dirt and over small pebbles.

Foam Filled Pneumatic Wheels have a higher initial cost than Air Filled Pneumatic Wheels. However, over time, they may prove to cost less because they last longer and avoid down time due to loss of air. Since people tend to load equipment only to the weight they can move easily,

Foam Filled Pneumatic Wheels can lead to higher productivity because they require less effort to move than pneumatics that are under inflated.

We suggest that you do NOT drill the mounting holes to attach the casters until you receive them.

Foam Filled Pneumatic Casters

All Foam Filled Pneumatic Wheels have Ball Bearings. Wheel Brakes appear as an option after you select a swivel pneumatic caster. Capacity ratings are based on use in a manual operation. NOT to be used above 3 mph. For manual use ONLY.

Available Options

Wheel Brake

TB: Pedal on side of wheel.

Detachable Swivel Lock

Casters or Wheels Only Chart (Click the Part Number to Order)

We do NOT include mounting Hardware.

Click on the Part Numbers for Pricing, Options and to ORDER.

Foam Filled Pneumatic Casters

Nominal Diam. Tread Width Tire / Wheel Color Max Cap. Each Caster lbs. Pneumatic Swivel Caster Part Number Pneumatic Swivel Caster Part Number Approx Swivel Radius Weight Lbs. Approx Overall Height
6″ 2″ Black / Zinc 200 9SF6X2-S-FF 9SF6X2-R-FF 5 1/2″ 5 3/4 7 1/2″
Nominal Diam. Tread Width Tire / Wheel Color Max Cap. Each Caster lbs. Pneumatic Swivel Caster Part Number Pneumatic Swivel Caster Part Number Approx Swivel Radius Weight Lbs. Approx Overall Height
8″ 3″ Black / Zinc 250 9SF8X3-S-FF 9SF8X3-R-FF 6 1/2″ 8 1/2 10″
Nominal Diam. Tread Width Tire / Wheel Color Max Cap. Each Caster lbs. Pneumatic Swivel Caster Part Number Pneumatic Swivel Caster Part Number Approx Swivel Radius Weight Lbs. Approx Overall Height
10″ 3 1/2″ Black / Zinc 350 9SF10X3.50-SFF 9SF10X3.50-RFF 7 1/4″ 11 1/2 12 1/4″

Foam Filled Pneumatic Wheels

Nominal Diam. Tread Width Tire / Wheel Color Max Cap. Each Caster lbs. Pneumatic Swivel Caster Part Number Approx Swivel Radius Weight Lbs. Approx Overall Height
6″ 2″ Black / Zinc 200 SF6X2-FF 2 1/4 2 1/2″ 1/2″ Ball Bearing
Nominal Diam. Tread Width Tire / Wheel Color Max Cap. Each Caster lbs. Pneumatic Swivel Caster Part Number Approx Swivel Radius Weight Lbs. Approx Overall Height
8″ 3″ Black / Zinc 250 SF8X3-FF 4 1/2 3 1/8″ 1/2″ Ball Bearing
8″ 3″ Gray / Zinc 250 SF8X3G-FF 4 1/2 3 1/8″ 1/2″ Ball Bearing
Nominal Diam. Tread Width Tire / Wheel Color Max Cap. Each Caster lbs. Pneumatic Swivel Caster Part Number Approx Swivel Radius Weight Lbs. Approx Overall Height
10″ 3 1/2″ Black / Zinc 350 SF10X3.50-FF 7 1/2 3 7/8″ 1/2″ Ball Bearing

Need Help with your order
(800) 501-3808

You should never select on the basis of load capacity alone. There is no industry standard for load capacity ratings and they
may not include a factor for abuse. Our capacity ratings are below what the casters are capable of carrying because most
applications have less than perfect conditions. Please refer to the information shown at the bottom of this page. If you have any
doubt as to which wheel or caster is the BEST choice for your application contact us for a recommendation