Model
SS-3
UP to 300 lbs - 3" thru 5" Wheels |
|
Capacity up to 300 pounds per caster. Stainless
steel casters are ideal for use in a wet or corrosive environment.
Features: The caster brackets are made of stamped stainless steel.
Swivels are standard with a seal and grease fitting.
Wheel Bearing: PS
= Precision Sealed Ball Bearings, D= Delrin Bearings, P= Plain Bore |
|
Model
SS-K3
UP to 300 lbs - 3" thru 5" Wheels |
|
Capacity up to 300 pounds per caster. Stainless
steel casters are ideal for use in a wet or corrosive environment.
Features: The caster brackets are made of stamped stainless steel. Wheel
Bearing: PS = Precision Sealed Ball Bearings, D= Delrin Bearings, P=
Plain Bore |
|
Model
SS-3A
UP to 300 lbs - 4" & 5" Wheels |
|
Capacity up to 300 pounds per caster. Stainless
steel casters are ideal for use in a wet or corrosive environment. These
casters are ideal for most light duty applications where a caster must be
totally immobile when the caster brake is applied. Caster Model 3A has a unique
brake which locks both the wheel and the swivel bearing simultaneously. This
"Total-Lock" brake insures that the swivel caster will not turn when the wheel
is locked. This combination wheel brake and swivel lock is essential for safety
in some applications - such as on worktables and medical equipment. The
Total-Lock brake is desireable whenever a brake is needed because it makes a
swivel caster totally immobile.
Features: * Swivel Construction -
Stamped steel. Swivel has double ball bearing. * Gray Non-marking Soft Rubber,
Gray Polyurethane, Black/Gray Polyurethane, Blue/Gray, Red/Gray and Orange/Gray
Polyurethane Wheels have precision sealed ball bearings ( PS ) shielded by full
thread guards. Polyolefin wheels do not have ball bearings in the wheel ( P ).
|
|
